Abstract:The development of high-performance bio-based epoxies with excellent mechanical properties, heat resistance and flame retardant properties is essential to mitigating the resource and environmental burdens caused by the widespread utilization of petroleum-based epoxies. This work focuses on the synthesis of a bifunctional epoxy resin (EEU) with the rigid tetrahydrobenzopyran ring derived from equol. The structure of the EEU epoxy resin was characterized, and using 4,4′ diamino diphenyl sulfone as the curing agent, the rheological properties, curing behavior and comprehensive properties of cured resin were studied. The results demonstrate that EEU-DDS presents the same curing behavior as DGEBA-DDS. The mechanical properties heat resistance and flame retardant properties of EEU-DDS are superior to DGEBA-DDS. The tensile strength, tensile modulus and glass transition temperature reached to 94.0 MPa, 3.62 GPa and 221 °C, respectively, higher than those of DGEBA-DDS (83.2 MPa, 2.81 GPa and 203 °C). EEU-DDS reached the V-1 rating in UL-94 tests with a high limiting oxygen index (LOI) (28 %), and the peak heat release rate and smoke release rate of 631 kW/m 2 and 0.155 m 2 /s were significantly lower than that of DGEBA-DDS. The flame retardant mechanism was proven to be gas-coacervated phase synergistic flame retardant. In addition, the interlamellar shear strength (ILSS), bending strength, and impact strength of carbon fiber reinforced resin matrix composites prepared by EEU-DDS reached 97.9 MPa, 1281 MPa, and 81.3 kJ/m 2 , respectively, higher than those of DGEBA-DDS. Therefore, equol-based epoxy resin can serve as an ideal alternative to petroleum-based bisphenol A-type epoxy resin, offering superior comprehensive properties.

Plasticizing effect of biodegradable dipropylene glycol bibenzoate and epoxidized linseed oil on diglycidyl ether of bisphenol A based epoxy resin

STUDY ON DGE-BHBTMBP/E-51/DDS CURED

Effect Of Polyethersulfone On The Mechanical And Rheological Properties Of Polyetherimide-Modified Epoxy Systems

Modification of bisphenol a type epoxy resin by biobased magnolol epoxy

Insights into Biobased Epoxidized Fatty Acid Isobutyl Esters from Biodiesel: Preparation and Application As Plasticizer

Efficient Toughening of DGEBA with a Bio-Based Protocatechuic Acid Derivative

Epoxy Toughening Using Low Viscosity Liquid Diglycidyl Ether of Ethoxylated Bisphenol‐a

Bio-based epoxy resins derived from diphenolic acid via amidation showing enhanced performance and unexpected autocatalytic effect on curing

Carbonated castor oil as a bioplasticiser and toughening agent for bisphenol a based epoxy

Modification of Epoxy Resin by Polyurethane Based on Polyether

Studies on the Modification of Commercial Bisphenol-A-Based Epoxy Resin Using Different Multifunctional Epoxy Systems

Equol-based epoxy resin as an ideal substitute for the diglycidyl ether of bisphenol A (DGEBA)

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Molecular dynamics simulation and properties of bisphenol A epoxy resin modified by alicyclic blending

Enhancing the comprehensive performance of bisphenol A epoxy resin via blending with a bio-based counterpart

Synthesis of Bio-based Epoxy Containing Phosphine Oxide as a Reactive Additive Toward Highly Toughened and Fire-retarded Epoxy Resins

Influence of Polyhydroxyl Modifier on Thermal Properties of Epoxy Resin Network

Novel bio-based epoxy resins from eugenol derived copolymers as an alternative to DGEBA resin

Synthesis of eugenol-based phosphorus-containing epoxy for enhancing the flame-retardancy and mechanical performance of DGEBA epoxy resin

Miscibility, Intramolecular Specific Interactions and Mechanical Properties of A Dgeba Based Epoxy Resin Toughened with A Sliding Graft Copolymer

A new strategy to improve the toughness of epoxy thermosets by introducing the thermoplastic epoxy