Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Modification of Epoxy Resin by Polyurethane Based on Polyether

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

Eco-Friendly Epoxy-Terminated Polyurethane-Modified Epoxy Resin with Efficient Enhancement in Toughness

Study of preparation and properties on epoxy resin adhesive modified by PU

Study on epoxy resins modified by polycarbonate polyurethanes

Properties and Morphology of Interpenetrating Polymer Networks Based on Poly(urethane-Imide) and Epoxy Resin

Synthesis and Characterization of Polyurethane and Epoxy Resin Interpenetrating Polymer Network

Microstructure of Epoxy Resin Grafted by Polyurethane

Preparation, Curing Properties, and Phase Morphology of Epoxy-Novolac Resin/multiepoxy-Terminated Low-Molecular-weight Poly(phenylene Oxide) Blend

Facile Synthesis of a Novel Hyperbranched Poly(urethane-Phosphine Oxide) As an Effective Modifier for Epoxy Resin

Study on the Synthesis and Properties of Waterborne Polyurea Modified by Epoxy Resin

Synthesis of epoxidized hydroxyl-terminated polybutadiene/tolylene diisocyanate polyurethane

On the synergism of interpenetrating polymer networks of PU/EP

Synthesis Technology and Properties of Waterborne Polyurethane Modified by Epoxy Resin

Mechanical Properties of Modified Hydroxyl-Terminated Polybutadiene Based Polyurethane

Synthesis of poly (propylene carbonate) diol-based waterborne polyurethane modified by epoxy resin with anticorrosion properties

Study on Properties of Epoxy Composites Modified by Functional Graphite Oxide and Polyurethane

Mechanical, thermal and electrical properties of epoxy modified with a reactive hydroxyl-terminated polystyrene-butadiene liquid rubber

Preparation and Properties of Toluene-Diisocyanate-Trimer-Modified Epoxy Resin

Study on Properties of Waterborne Polyurethane Acrylate Modified Epoxy Acrylate Resin