Abstract:The red clay is widely distributed in Guizhou province, which is characterized by high natural moisture content, difficult compaction and serious shrinkage and crackingin, and phosphogypsum is discharged for 5 million tons every year in Guizhou province. For the sake of effectively reducing the accumulation of phosphogypsum, mixtures were prepared with cement as a curing agent and mass ratios of cement to phosphogypsum of 1:1, 1:2 and 1:3 (low content phosphogypsum group) and phosphogypsum to red clay of 1:1, 1:2 and 1:3 (high content phosphogypsum group). Unconfined compressive strength, expansion, shrinkage and dynamic characteristic tests were conducted to analyze the behavior and mechanical properties of the mixtures. The modification mechanism of the mixtures by phosphogypsum was further explored by XRD (X-ray diffraction) and SEM (scanning electron microscopy). which provided a theoretical basis for the application of phosphogypsum in highway engineering and improved the engineering properties of red clay. The results show that the unconfined compressive strength of the phosphogypsum stabilized soil in the low content phosphogypsum group is greater than that in the high content phosphogypsum group. When cement:phosphogypsum = 1:2.2–1:3, the unconfined compressive strength of the mixture is maximum. When cement:phosphogypsum = 1:3, the maximum dynamic shear modulus of phosphogypsum stabilized soil is the largest. The absolute expansion rate and linear shrinkage rate of phosphogypsum stabilized soil in the low content phosphogypsum group are greater than those in the high content phosphogypsum group. When cement: phosphogypsum = 1:1–1:3, the absolute expansion rate is 6.5–12.3%, and the linear shrinkage rate is 1.3–2%. When red clay:Phosphogypsum = 1:1–1:3, the absolute expansion rate is 0.2–4%, and the linear shrinkage rate is 1–1.5%. The more phosphogypsum content, the smaller the expansion deformation and shrinkage deformation of the mixture. It is suggested that mass ratios of phosphogypsum to red clay is 1:1, and the cement content is 5%. Which can not only make full use of phosphogypsum solid waste, but also improve the engineering properties of red clay.

Application of phosphogypsum to solidification of silty soil: Mechanical properties and microstructure

Experimental study on static and dynamic mechanical properties of phosphogypsum

Mechanical properties of phosphogypsum-soil stabilized by lime activated ground granulated blast-furnace slag

Effects of pH and Fineness of Phosphogypsum on Mechanical Performance of Cement–Phosphogypsum-Stabilized Soil and Classification for Road-Used Phosphogypsum

Soil utilization of solid waste: Small-strain dynamic properties and microscopic mechanism of phosphogypsum-modified coastal cement soil

Effects of phosphogypsum on enzyme activity and microbial community in acid soil

Mechanical properties and soluble phosphorus solidification mechanism of a novel high amount phosphogypsum-based mortar

Analysis of the Mechanical Properties of Cured Sludge by Alkaline Excitation of Phosphogypsum

Surface modification of phosphogypsum and application in polyolefin composites

Development and optimization of phosphogypsum-based geopolymer cement

Mechanical properties and modification mechanism of phosphogypsum stabilized soil

Utilization of untreated-phosphogypsum as filling and binding material in preparing grouting materials

Study of Semi-Dry High Target Solidification/Stabilization of Harmful Impurities in Phosphogypsum by Modification

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Research on the technology and mechanism of direct acidification of phosphogypsum and deeply solidify impurities with lime

Study on preparation of inorganic binder stabilized material with large dosage of phosphogypsum

The Influence Mechanism of Molar Ratio on the Performance of Phosphogypsum-Modified Geopolymer Material

Influence of phosphogypsum on mechanical properties and microstructure of iron tailings cementitious material

Collaborative effects of red mud and phosphogypsum on geotechnical behavior of cement-stabilized dredged clay

A new civil engineering material: normal temperature modified phosphogypsum embedded filler

Immobilization of phosphogypsum for cemented paste backfill and its environmental effect