Abstract:The red clay is widely distributed in Guizhou province, which is characterized by high natural moisture content, difficult compaction and serious shrinkage and crackingin, and phosphogypsum is discharged for 5 million tons every year in Guizhou province. For the sake of effectively reducing the accumulation of phosphogypsum, mixtures were prepared with cement as a curing agent and mass ratios of cement to phosphogypsum of 1:1, 1:2 and 1:3 (low content phosphogypsum group) and phosphogypsum to red clay of 1:1, 1:2 and 1:3 (high content phosphogypsum group). Unconfined compressive strength, expansion, shrinkage and dynamic characteristic tests were conducted to analyze the behavior and mechanical properties of the mixtures. The modification mechanism of the mixtures by phosphogypsum was further explored by XRD (X-ray diffraction) and SEM (scanning electron microscopy). which provided a theoretical basis for the application of phosphogypsum in highway engineering and improved the engineering properties of red clay. The results show that the unconfined compressive strength of the phosphogypsum stabilized soil in the low content phosphogypsum group is greater than that in the high content phosphogypsum group. When cement:phosphogypsum = 1:2.2–1:3, the unconfined compressive strength of the mixture is maximum. When cement:phosphogypsum = 1:3, the maximum dynamic shear modulus of phosphogypsum stabilized soil is the largest. The absolute expansion rate and linear shrinkage rate of phosphogypsum stabilized soil in the low content phosphogypsum group are greater than those in the high content phosphogypsum group. When cement: phosphogypsum = 1:1–1:3, the absolute expansion rate is 6.5–12.3%, and the linear shrinkage rate is 1.3–2%. When red clay:Phosphogypsum = 1:1–1:3, the absolute expansion rate is 0.2–4%, and the linear shrinkage rate is 1–1.5%. The more phosphogypsum content, the smaller the expansion deformation and shrinkage deformation of the mixture. It is suggested that mass ratios of phosphogypsum to red clay is 1:1, and the cement content is 5%. Which can not only make full use of phosphogypsum solid waste, but also improve the engineering properties of red clay.

Collaborative effects of red mud and phosphogypsum on geotechnical behavior of cement-stabilized dredged clay

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Reuse of Pretreated Red Mud and Phosphogypsum as Supplementary Cementitious Material

Effect of recycled phosphogypsum and calcium aluminate cement on the strength behavior optimization of cement-treated dredged soil: A co-utilization of solid wastes

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Use of recycled gypsum in the cement-based stabilization of very soft clays and its micro-mechanism

Improvement of expansive soils mixed with red mud and phosphogypsum

The effects of desulfurized gypsum on the mechanical properties of dredged clay with high initial water content stabilized by ternary geopolymer

Influences of pretreatment methods on the mechanical and environmental behaviors of PG-GGBS-LM ternary stabilizer

Multiscale experimental analysis of marine clay stabilized with coal gangue–calcium carbide residue geopolymer

Engineering Properties and Microstructure of Soils Stabilized by Red-Mud-Based Cementitious Material

Application of phosphogypsum to solidification of silty soil: Mechanical properties and microstructure

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Mechanical Characteristics and Microstructural Changes in Phosphogypsum-Cement-Lime Composite Modified Loess

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill

Behaviour and Microstructural Characteristics of Lime-GGBS-Treated Kaolin Clay Contaminated with Gypsum

Mechanical properties and modification mechanism of phosphogypsum stabilized soil

Experimental study on static and dynamic mechanical properties of phosphogypsum