Abstract:Reducing cement consumption by reutilizing solid wastes in soil stabilization and eliminating the residual by-product of cement hydration as much as possible could effectively improve the mechanical performance and economic benefits of problematic soils in underground engineering practices. This study employed red mud and phosphogypsum as additives to improve the engineering performance of cemented silty sands. A series of chemical, mechanical, and microstructural tests were conducted to investigate the optional mixing ratio of red mud and phosphogypsum to replace cement in silty sand stabilization, the strength improvement of silty sand with different total dosages of the composite binder (the mixture of cement, red mud, and phosphogypsum), the ratios of water to the composite binder, and curing ages compared with that stabilized with only ordinary Portland cement, and their mechanical performance enhancement mechanism. The results show that red mud and phosphogypsum could replace about 1/3 of cement consumption to the maximum in soil stabilization. The optional mixing ratio of cement: red mud: phosphogypsum for silty sand stabilization was 16:7:1. Compared with pure cement-stabilized silty sands, the silty sand stabilized with the composite binder achieved a superior mechanical performance at the initial age but a relatively slow increase over the curing age when the binder consumption was the same. The tensile and shear strength of silty sands stabilized with the composite binder were similar to that of only cement. The gradually disappeared calcium hydroxide and the downsized pores illustrated in microstructural observation implied that adding red mud and phosphogypsum in silty sand stabilization could not only compact the internal structure of the soil but also make up the defects of drying shrinkage and shrinkage cracking induced by the by-products of cement hydration. The results of this study can provide a reference for the resourceful utilization of red mud and phosphogypsum and for saving cement consumption in engineering practices.

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Effect of recycled phosphogypsum and calcium aluminate cement on the strength behavior optimization of cement-treated dredged soil: A co-utilization of solid wastes

Reuse of Pretreated Red Mud and Phosphogypsum as Supplementary Cementitious Material

Collaborative effects of red mud and phosphogypsum on geotechnical behavior of cement-stabilized dredged clay

Mechanical and microstructural properties of cemented marine dredged clay with pre-hydrated ground granulated blast furnace slag

Utilization of waste marine dredged clay in preparing controlled low strength materials with polycarboxylate superplasticizer and ground granulated blast furnace slag

Al2O3/SO3 molar ratio of PG-CAC-based binders on the macro-micro properties of cement-treated waste dredged clay

Alkali-activated red mud in stabilizing marine dredged clay with low amount of cement

Recycling of phosphogypsum and red mud in low carbon and green cementitious materials for vertical barrier

Use of recycled gypsum in the cement-based stabilization of very soft clays and its micro-mechanism

The effects of desulfurized gypsum on the mechanical properties of dredged clay with high initial water content stabilized by ternary geopolymer

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill

Mechanical and microstructural properties of silt roadbed filling improved with cement, red mud and desulfurization gypsum

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Stabilization of dredged clays with ternary alkali-activated materials: Towards sustainable solid wastes recycling

Engineering Properties and Microstructure of Soils Stabilized by Red-Mud-Based Cementitious Material

Strength performance and enhancement mechanism of silty sands stabilized with cement, red mud, and phosphogypsum

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Feasibility of Reusing Marine Dredged Clay Stabilized by a Combination of By-Products in Coastal Road Construction