Abstract:This study introduces three types of multivariable fragility surfaces, integrating effective structural features to improve damage assessment. The incorporation of additional information such as building occupancies, structural responses, and underlying soil types enhances the accuracy of conventional fragility curve predictions. Additionally, three modification factors are proposed to further refine conventional fragility curves and provide more precise predictions. The multivariable fragility surfaces are developed for eccentric brace frames modeled in Opensees software which is validated by experimental results and subjected to incremental dynamic analysis with 44 far-field ground motions. The influence of soil flexibilities on structural responses is incorporated through Winkler springs, representing soil-structure interaction. Diverse occupancies, such as hospitals, museums, and residential structures, are assessed using various peak floor acceleration thresholds and story drift ratios, employing multidimensional limit state functions to consider both structural and nonstructural losses. To account for uncertainties in structural responses and a single intensity measurement, a damage-sensitive feature derived from roof acceleration response, obtained through signal processing and system identification techniques, is introduced. The results for the proposed multivariable fragility surfaces indicate that the spectral acceleration corresponding to a 50% probability of exceedance could vary between 10.2 and 89%, in comparison to the corresponding conventional fragility curves. Finally, to evaluate the application of the enhanced fragility surface and modification factors, two instrumented EBF buildings, a 4-story EBF building, and a real 5-story hospital EBF, are selected as case studies. With additional details on soil types, occupancies, and structural responses, the process of employing modification factors resulting in enhanced fragility curves is demonstrated.

Comparative probability-based seismic safety assessment of base-isolated buildings: A case study

Seismic Fragility Reduction for Base Isolated RC Frame Buildings by Curved Surface Sliding Bearings with Over-Stroke Displacement Capacity

Seismic Fragility and Reliability of Base-Isolated Structures with Regard to Superstructure Ductility and Isolator Displacement Considering Degrading Behavior

Probabilistic Seismic Performance Assessment of Tall RC Special Moment-resisting Frame Buildings Equipped with Buckling-restrained Braces under Near-field Excitations

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Seismic vulnerability of a pre-code, reinforced concrete, apartment-block building

Seismic isolation of buildings with sliding concave foundation (SCF)

Utilizing Base-Isolation Systems to Increase Earthquake Resiliency of Healthcare and School Buildings

Impact of Probabilistic Modeling Alternatives on the Seismic Fragility Analysis of Reinforced Concrete Dual Wall–Frame Buildings towards Resilient Designs

Effect of displacement restraint on the collapse performance of seismically isolated buildings

Seismic Collapse Probability and Life Cycle Cost Assessment of Isolated Structures Subjected to Pounding With Smart Hybrid Isolation System Using a Modified Fuzzy Based Controller

Does seismic isolation reduce the seismic vulnerability and the variability of the inelastic seismic response? Large-scale experimental investigation

A new form of steel base isolation system for seismic high-rise building

Stochastic Seismic Response and Reliability Analysis of Base-Isolated Structures

Fragility-Based Performance Evaluation of Asymmetric Single-Story Buildings in Near Field and Far Field Earthquakes

Multivariable fragility surfaces for earthquake-induced damage assessment of buildings integrating structural features

Component damage‐based seismic fragility analysis of high‐rise building with transfer structure

Seismic Performance of Multi Story Building with Different Base Isolators

Seismic Fragility Analysis of Hollow Concrete Block Infilled Reinforced Concrete Buildings

Shaking table tests of base-isolated reinforced concrete frame by double friction pendulum bearings

Seismic Performance Evaluation According to HSS and CFST Columns of 3D Frame Buildings with Rubber Friction Bearing (RFB)