Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Effect of displacement restraint on the collapse performance of seismically isolated buildings

Static and dynamic inelastic P -Δ effect for seismic design

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

Seismic Fragility Reduction for Base Isolated RC Frame Buildings by Curved Surface Sliding Bearings with Over-Stroke Displacement Capacity

Assessing seismic fragility on direct displacement-based designed RC frame considering SSI effect

Effects of Seismic and Progressive Collapse Designs on the Vulnerability of RC Frame Structures

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Does seismic isolation reduce the seismic vulnerability and the variability of the inelastic seismic response? Large-scale experimental investigation

Performance of a passive rate‐independent damping device in a seismically isolated multistory building

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Seismic risk assessment of self-centering prestressed concrete frames with sliding and masonry infill walls: experimental and numerical models

Seismic performance of buildings with novel self‐centering base isolation system for earthquake resilience

Seismic Performance Evaluation According to HSS and CFST Columns of 3D Frame Buildings with Rubber Friction Bearing (RFB)

Displacement Control of Existing Steel Moment-Resisting Frame Structures Using Buckling-Restrained Braces

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Factors affecting the seismic collapse performance of realistic low‐rise braced frame buildings, including soil structure interaction and foundation flexibility

Seismic performance of RC frames with self-centering precast post-tensioned connections considering the effect of infill walls

Seismic Collapse Probability and Life Cycle Cost Assessment of Isolated Structures Subjected to Pounding With Smart Hybrid Isolation System Using a Modified Fuzzy Based Controller

Shaking table tests of base-isolated reinforced concrete frame by double friction pendulum bearings

Seismic collision potential of adjacent base-isolated buildings with corridor bridges subjected to bidirectional near-fault pulse-like ground motions