Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Shaking table tests of base-isolated reinforced concrete frame by double friction pendulum bearings

Shaking table tests and numerical studies on the seismic behaviors of FPB in railway continuous beam bridges

Advances and challenges in friction pendulum bearings for seismic isolation systems

Shaking table tests on seismic behaviors of a single-layer spherical lattice shell with shape memory alloy-controlled friction pendulum bearings

Development of distributed tunable friction pendulum system (DTFPS) for semi-active control of base-isolated buildings

Shaking table test of a steel frame structure with layered three‐dimensional isolation

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Seismic Performance Assessment of a Single-Layer Spherical Lattice Shell Structure with Multifunctional Friction Pendulum Bearings

Performance of Seismically Isolated Pile-supported Structures through 1 g Shaking Table Tests

Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior

Study of the mechanics of progressive collapse of FPB isolated beam-pier substructures

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Seismic response of structures with friction pendulum inerter system (FPIS) under near-fault earthquakes

Seismic isolation effect of a new type of friction pendulum bearing in high-speed railway girder bridge

Performance Analysis and Comparison of Two Base Isolation Systems with Super-Large Displacement Friction Pendulum Bearings

Mechanical Properties of Innovative Prefabricated Friction Pendulum Bearing with Concrete-Filled Steel Tube System

Development of a tunable friction pendulum system for semi-active control of building structures under earthquake ground motions

Resilient Isolation-Structure Systems with Super-Large Displacement Friction Pendulum Bearings

Seismic displacement response analysis of Friction Pendulum Bearing under friction coupling and collision effects

Wind-Induced Dynamic Response of Inter-Story Isolated Tall Buildings with Friction Pendulum Bearing Based on an Enhanced Simplified Model