Abstract:Vertical and three-dimensional (3D) isolation systems are emerging control technologies for spatial grid structures in high seismic intensity regions. Recently, multistage vertical isolation bearings (MVIBs) based on prepressed spring devices (PSDs) have been proposed to support the lattice shell and prevent the transfer of vertical ground motion components to the structure. Seismic dampers can be further combined with an MVIB to develop a hybrid bearing with a damping capacity. In this study, the vertical load-carrying and isolation mechanisms underlying the MVIB configuration were investigated in detail. A series of proof-of-concept tests were conducted on a prototype MVIB comprising four identical PSDs to study its actual mechanical behavior. The test results indicated that the MVIB specimen exhibited multilinear elastic behavior with enhanced load resistance. The key parameters of the tested bearing, such as the transition force and isolation stiffness, increased linearly with the number of PSDs. The MVIB model was subsequently refined using ABAQUS to comprehensively understand the mechanical performance of the spring isolator. Following a device-level study, a single-layer spherical lattice shell was used as the research target. The damped MVIBs and friction pendulum bearings were arranged at the roof supports and column bases, respectively, and the stiffness and energy dissipation properties of these isolators were designed. A system-level seismic analysis was conducted using OpenSees to compare the triaxial dynamic responses of the target structure before and after isolation. The results indicated that the separated 3D isolation system achieved its intended design goals and effectively protected the lattice shell structure from tridirectional seismic shaking.

Seismic Performance Assessment of a Single-Layer Spherical Lattice Shell Structure with Multifunctional Friction Pendulum Bearings

Shaking table tests on seismic behaviors of a single-layer spherical lattice shell with shape memory alloy-controlled friction pendulum bearings

Seismic protection of a single-layer spherical lattice shell structure using a separated three-dimensional isolation system

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Cyclic behavior of an adaptive seismic isolation system combining a double friction pendulum bearing and shape memory alloy cables

Research on vertical isolation performance of lattice shell canopy with three-dimensional FPB of Beijing Workers'Stadium

Advances and challenges in friction pendulum bearings for seismic isolation systems

Evaluation of isolation performance of, reticulated shell structures with curvature-consistent frictional pendulum isolation system through shaking table tests

Shaking table tests of base-isolated reinforced concrete frame by double friction pendulum bearings

Shaking table tests and numerical studies on the seismic behaviors of FPB in railway continuous beam bridges

Seismic displacement response analysis of Friction Pendulum Bearing under friction coupling and collision effects

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Seismic performance improvement of a three-dimensional isolated spherical reticulated shell structure using pseudo-negative-stiffness magnetorheological dampers

Seismic response of structures with friction pendulum inerter system (FPIS) under near-fault earthquakes

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Study of the mechanics of progressive collapse of FPB isolated beam-pier substructures

Seismic performance evaluation of VCFPB isolated storage tank using real-time hybrid simulation

Seismic Analysis of Coupled High-Speed Train-Bridge with the Isolation of Friction Pendulum Bearing

Static Stability Behavior-Based Seismic Damage Endurance Assessment of Long-Span Single-Layer Spherical Lattice Shells

Decoupled Calculation and Case Study Analysis of Friction Pendulum Bearing Considering the Jumping-Off Effect

Study on Seismic Isolation of Long Span Double Deck Steel Truss Continuous Girder Bridge