Abstract:In order to improve the seismic performance of a continuous bridge, we propose to install self-centering functional separation bearings (Sc-FSB) between the fixed pier and the girder in the bridge. Following the design idea of separating functionalities, the Sc-FSB device is primarily composed of a sliding bearing to bear vertical load, a friction cable to carry horizontal seismic force and dissipate the seismic energy input into the superstructure, and self-centering springs to achieve post-earthquake self-centering effects. In this study, the Sc-FSB device's hysteretic model is established, and its theoretical formula is deduced. The quasi-static cyclic tests of 10 Sc-FSB device specimens were performed to verify their promising mechanical performances, in which we consider parameters of two friction cables with different diameters and three self-centering springs with different stiffnesses. The results show that the Sc-FSB device holds excellent characteristics of a typical friction damper, such as relatively stable outputs, good energy dissipation and deformation capacity under all working conditions, and its fatigue performance meets the requirements of typical specifications. In addition, several unique features of the Sc-FSB are identified as follows. The maximum damping force is independent of the loading frequency, and it increases with the displacement amplitude. The damping force is significantly affected by the pre-tension force of the friction cable and the number of winding coils, and as a result, the energy dissipation performance is promising. The stiffness and pre-tension force of the self-centering spring significantly improve the self-centering ability of the Sc-FSB device. The design of friction cable and self-centering spring effectively separates the functions of bearings. This study can serve as a foundation for the further study of Sc-FSB device and as a reference for the research of other similar friction dampers.

Study on Seismic Isolation of Long Span Double Deck Steel Truss Continuous Girder Bridge

Seismic study of a widened and reconstructed long-span continuous steel truss bridge

Seismic Isolation Design for Long-span Prestressed Concrete Continuous Girder Bridge

SEISMIC RESPONSE ANALYSIS OF CABLE-STAYED BRIDGES USING CARBON FIBER COMPOSITE CABLE

Seismic isolation effect of a new type of friction pendulum bearing in high-speed railway girder bridge

Study on the damping efficiency of continuous beam bridge with constant cross-section applied by lead rubber bearings and fluid viscous dampers

A Kind of Simplified Design Approach for Girder Bridge Isolated by Triple Friction Pendulum Bearing

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Quasi-static cyclic loading experiment and analysis of mechanical properties of the Sc-FSB

Seismic Analysis of Coupled High-Speed Train-Bridge with the Isolation of Friction Pendulum Bearing

Study on the pier bottom self-centering seismic isolation structure of the high-pier continuous rigid frame bridges

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior

Shaking table tests and numerical studies on the seismic behaviors of FPB in railway continuous beam bridges

The Seismic Response Of Long Span Continuous Rigid Frame Box Girder Bridges Subjected To Spatially Varying Ground Motions

Seismic Vulnerability Analysis of Concrete-Filled Steel Tube Tied Arch Bridges Using Symmetrically Arranged High-Damping Rubber Bearings

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Experimental study on a cable-stayed bridge isolated with the combination of elastoplastic cables and fluid viscous dampers in the transverse direction

Numerical investigation of transverse steel damper (TSD) seismic system for suspension bridges considering pounding between girder and towers

A SMA-based sliding friction damper for enhancing the transverse seismic performance of isolated bridges