Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Damage Development in a Cellular Axisymmetric Tank Additive-Manufactured from Plastic Filament. Part 2. Experimental Studies of Damage to Cellular Shell Systems and the Dependence of Strength Characteristics on Process Parameters

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Strength of the Layered Cylindrical Shell of Composites Under Internal Pressure with Regard to External Damage

Characterizing the effects of liner and fiber-reinforced resin composite shell on fracture energy in type-III high-pressure composite tanks

Multi‐scale damage analysis of filament‐wound carbon fiber‐reinforced epoxy composites for hydrogen storage tanks under high strain rates

Influence of Filler and Fiber Properties and Their Ratio on the Dynamics and Strength of Reinforced Cylinders Under Internal Explosion

Modeling Geometrically Nonlinear Large Deformation Behaviors of Matrix Cracked Hybrid Composite Deep Shells Containing CNTRC Layers

Acoustic Emission-Based Analysis of Damage Mechanisms in Filament Wound Fiber Reinforced Composite Tubes

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

Stress-Strain Behaviour of Reparable Composite Panel with Step-Variable Thickness

Experimental-Numerical Failure Analysis of Thin-Walled Composite Columns Using Advanced Damage Models

Multi‐scale experimental investigation of porosity‐induced damage effects in filament‐wound carbon fiber reinforced epoxy composites used in hydrogen storage tanks

Tensile‐after‐ablation progressive damage and the failure mechanism of 2.5D woven composites with crack pores

Progressive Damage Analysis for Multiscale Model of Linerless Composite Cryotank and Integrated Design

Investigation of Crack Propagation and Failure of Liquid-Filled Cylindrical Shells Damaged in High-Pressure Environments

Numerical Investigation into In-Plane Crushing of Tube-Reinforced Damaged 5052 Aerospace Grade Aluminum Alloy Honeycomb Panels

Evaluation and Modeling of the Fatigue Damage Behavior of Polymer Composites at Reversed Cyclic Loading

Determination of the influence of deflections in the thickness of a composite material on its physical and mechanical properties with a local damage to its wholeness

Experiments and Simulations on the Shape Memory Process of Thermally-Induced Shape Memory Polymer Composite Thin-Wall Structure Considering Progressive Damage

Ultimate state assessment of medium-thick composite cylindrical pressure shells based on progressive damage

The role of “thickness effect” on the damage progression and crack growth inside the plain-woven carbon fiber composites