Abstract:Porosity‐induced damage effects. Hydrogen‐fueled vehicles, recognized for their environmental benefits as they emit only water vapor, represent a sustainable alternative to traditional cars. This paper investigates the relationship between the microstructure and mechanical properties of carbon fiber‐reinforced epoxy composites used to manufacture lightweight hydrogen storage pressure vessels through the filament winding process. This fabrication technique, while common, often results in variable fiber orientations and porosity content that affect the mechanical properties of the composite structures. Our study uses tubes made from carbon fiber reinforced epoxy resin with different angular fiber orientations (±15° and ±30°) and multilayer structures to analyze how these variations impact the mechanical properties and damage behavior of the composites. A series of tests, including physical–chemical characterizations, porosity measurements, and multiscale mechanical assessments such as tensile and loading‐unloading analysis have been conducted. The results demonstrate that porosity, measured in the range of 5%–7%, significantly impacts mechanical performance. Moreover, a 40% decrease in Young's modulus was observed between the ±15° and ±30° fiber orientations, and a 65% reduction was noted for the multilayer structure. Microscopically, the presence of porosity initiates cracks and leads to fiber/matrix decohesion and fiber breakage. Mesoscopically, these defects can merge to form transverse cracks and micro‐delaminations between layers, highlighting the complex behaviors of these composites under loading. This information is critical for improving the design and durability of hydrogen storage systems. Highlights Porosity, measured in the range of 5%–7%, significantly affects mechanical performance, reducing Young's modulus by up to 40% between ±15° and ±30° fiber orientations and by 65% in multilayer structures. Fiber/matrix decohesion and crack initiation due to porosity lead to the formation of transverse cracks and micro‐delaminations between layers, affecting the durability of the composite. Optimizing fiber orientation and reducing porosity are critical to improving the mechanical performance and long‐term durability of hydrogen storage vessels.

Multi‐scale damage analysis of filament‐wound carbon fiber‐reinforced epoxy composites for hydrogen storage tanks under high strain rates

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Progressive failure analysis of 2D woven composites at the meso-micro scale

Multi‐scale experimental investigation of porosity‐induced damage effects in filament‐wound carbon fiber reinforced epoxy composites used in hydrogen storage tanks

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

Multiscale analysis of composite pressure vessel structures wound with different fiber tensile force

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Acoustic Emission-Based Analysis of Damage Mechanisms in Filament Wound Fiber Reinforced Composite Tubes

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Tensile impact behaviors and damage mechanism of woven carbon fiber-reinforced-polymer laminates considering adiabatic shear band

Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

Influence of Complex Geometries on Damage Tolerance of Porous Carbon Fiber Network

Multiscale Image-Based Modelling of Damage and Fracture in Carbon Fibre Reinforced Polymer Composites

Effect of strain rate on the in-plane orthotropic constitutive response and failure behaviour of a unidirectional non-crimp fabric composite

Robust instrumentation of composite pressure vessels manufactured via multi-filament winding for distributed fiber optic sensing

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings