Erratum to: Wire Arc Additive Manufacturing: Influence of Production Parameters on Layer Geometry

A. A. Snezhko,O. R. Luzanov,V. I. Kirillov,A. A. Fadeev,L. A. Martynova,O. V. Shcherbina

DOI: https://doi.org/10.3103/s1068798x2402031x

2024-04-28

Russian Engineering Research

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S1068798X2402031X

English Else

What problem does this paper attempt to address?

Erratum to: Production of Machine Tools for the Aircraft Industry: Import Substitution

A. I. Tikhonov,N. V. Prosvirina

DOI: https://doi.org/10.3103/s1068798x24020308

2024-04-28

Russian Engineering Research

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S1068798X24020308

English Else
Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Yihui Zhang,Fan Zhang,Zheng Yan,Qiang Ma,Xiuling Li,Yonggang Huang,John A. Rogers

DOI: https://doi.org/10.1038/natrevmats.2017.29

IF: 83.5

2017-01-01

Nature Reviews Materials

Abstract:Nature Reviews Materials 2, 17019 (2017) In the originally published version of this article, there was an error in the Acknowledgements section. This has been corrected in both the HTML and PDF versions.
Erratum to: Web Laboratory for Supercomputer Modeling of Spraying Processes

N. Tarasov,V. Podryga,S. Polyakov

DOI: https://doi.org/10.1134/s1063779624040026

2024-08-19

Physics of Particles and Nuclei

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1063779624040026

physics, particles & fields
Erratum to: Description of full-range strain hardening behavior of steels

Tao Li,Jinyang Zheng,Zhiwei Chen

DOI: https://doi.org/10.1186/s40064-016-2998-3

2016-01-01

SpringerPlus

Abstract:[This corrects the article DOI: 10.1186/s40064-016-2998-3.].
Erratum: Publisher's Note: "A suspended layer additive manufacturing approach to the bioprinting of tri-layered skin equivalents" [APL Bioeng. 5, 046103 (2021)]

Richard J A Moakes,Jessica J Senior,Thomas E Robinson,Miruna Chipara,Aleksandar Atanasov,Amy Naylor,Anthony D Metcalfe,Alan M Smith,Liam M Grover

DOI: https://doi.org/10.1063/5.0151285

2023-04-03

Abstract:[This corrects the article DOI: 10.1063/5.0061361.].
Erratum to: A Magnetic Field-Controlled Elastomer Composite Based on Porous Polydimethylsiloxane

A. A. Amirov,A. S. Kaminskiy,E. A. Arkhipova,N. A. Cherkasova,A. O. Tovpinets,V. N. Leucine,A. P. Pyatakov,V. E. Zhivulin,V. V. Rodionova

DOI: https://doi.org/10.3103/s1062873823350010

2023-10-25

Bulletin of the Russian Academy of Sciences Physics

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S1062873823350010

English Else
Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Jiehui Liu,Hongjun Hu,Yang Liu,Dingfei Zhang,Zhongwen Ou,Yan Zhi

DOI: https://doi.org/10.1515/mt-2023-8002

2023-06-16

Materialpruefung/Materials Testing

Abstract:Corrigendum to: Jiehui Liu, Hongjun Hu, Yang Liu, Dingfei Zhang, Zhongwen Ou and Yan Zhi, "Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61," Materials Testing , vol. 62, no. 4, pp. 395–399, 2020 (https://doi.org/10.3139/120.111476). As Figures 5a and c have already been published in other articles, the authors wish to replace them by the following figures: Worn surface morphology under load 5 N and reciprocating frequency 2 Hz of magnesium alloy made by a) CE process, b) DE process, c) friction coefficients varying with different loads of dry sliding. The authors would like to apologize for any inconvenience caused. © 2023 Walter de Gruyter GmbH, Berlin/Boston
Erratum to: Atom Probe Tomography of High-Entropy Alloy AlCoCrFeNi

S. V. Rogozhkin,A. S. Shutov,A. A. Khomich,A. A Nikitin,A. A. Lukyanchuk,O. A. Raznitsyn,L. Meshi

DOI: https://doi.org/10.1134/S1063778821330012

2022-02-27

Physics of Atomic Nuclei

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1063778821330012

physics, particles & fields, nuclear
Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Xiaoming Bai,Miguel A. Bessa,António R. Melro,Pedro P. Camanho,Licheng Guo,Wing Kam Liu

DOI: https://doi.org/10.1016/j.compstruct.2016.05.081

IF: 6.3

2016-01-01

Composite Structures

Abstract:The authors regret to inform that one of the modifications proposed in the article “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” [1] was found to be unnecessary: the paraboloid yield criterion is sufficient to describe the shear behavior of the epoxy matrix considered (Epoxy 3501-6). The authors recently noted that the experimental work [2] used to validate the pure matrix response considered engineering shear strain instead of its tensorial counter-part, which caused the apparent inconsistency with the paraboloid yield criterion.
Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array: erratum

Samuel D. Gilinsky,Mo Zohrabi,Wei Yang Lim,Omkar D. Supekar,Victor M. Bright,Juliet T. Gopinath

DOI: https://doi.org/10.1364/oe.517707

IF: 3.8

2024-02-10

Optics Express

Abstract:Samuel D. Gilinsky, Mo Zohrabi, Wei Yang Lim, Omkar D. Supekar, Victor M. Bright, Juliet T. Gopinath The authors present an erratum to update the Acknowledgements section in their published article, ["Fabrication and characterization ... [Opt. Express 32, 6704-6704 (2024)]

optics
Correction: Thermoelectric Nanowires for Dense 3D Printed Architectures.

Danwei Zhang,Jayanthi Ramiah,Mehmet Cagirici,Kivanc Saglik,Samantha Faye Duran Solco,Jing Cao,Jianwei Xu,Ady Suwardi

DOI: https://doi.org/10.1039/d4mh90056a

IF: 13.3

2024-01-01

Materials Horizons

Abstract:Correction for 'Thermoelectric nanowires for dense 3D printed architectures' by Danwei Zhang et al., Mater. Horiz., 2024, 11, 847-854, https://doi.org/10.1039/D3MH01646C.
Erratum: “Data-Driven Design Space Exploration and Exploitation for Design for Additive Manufacturing” [ASME J. Mech. Des. 2019, 141(10), P. 101101; DOI: 10.1115/1.4043587]

Yi Xiong,Pham Luu Trung Duong,Dong Wang,Sang‐In Park,Qi Ge,N Raghavan,David W. Rosen

DOI: https://doi.org/10.1115/1.4044872

2019-01-01

Journal of Mechanical Design

Abstract:The above article was originally intended to be published as part of this Special Issue, Machine Learning for Engineering Design – Part I. However, it was published in error in the October issue, 141(10).
Numerical Analysis on the Effect of Process Parameters on Deposition Geometry in Wire Arc Additive Manufacturing

Shilong Fan,Fei Yang,Xiaonan Zhu,Zhaowei Diao,Lin Chen,Mingzhe Rong

DOI: https://doi.org/10.1088/2058-6272/ac4f41

2022-01-01

Plasma Science and Technology

Abstract:Here we develop a two-dimensional numerical model of wire and arc additive manufacturing (WAAM) to determine the relationship between process parameters and deposition geometry, and to reveal the influence mechanism of process parameters on deposition geometry. From the predictive results, a higher wire feed rate matched with a higher current could generate a larger and hotter droplet, and thus transfer more thermal and kinetic energy into melt pool, which results in a wider and lower deposited layer with deeper penetration. Moreover, a higher preheat temperature could enlarge melt pool volume and thus enhance heat and mass convection along both axial and radial directions, which gives rise to a wider and higher deposited layer with deeper penetration. These findings offer theoretical guidelines for the acquirement of acceptable deposition shape and optimal deposition quality through adjusting process parameters in fabricating WAAM components.
Erratum to “Reliability Improvement of GaN Devices on Free-Standing GaN Substrates”

Dongliang Zhang,Xinhong Cheng,Wai Tung Ng,Lingyan Shen,Li Zheng,Qian Wang,Ru Qian,Ziyue Gu,Dengpeng Wu,Wen Zhou,Hongyue Zhu,Yuehui Yu

DOI: https://doi.org/10.1109/ted.2018.2884181

IF: 3.1

2019-01-01

IEEE Transactions on Electron Devices

Abstract:The authors would like to make correction to [1] , affiliations on page 1, because one of the affiliations in [1] was missing.
Erratum: Electrostatic-Interaction-Driven Assembly of Binary Hybrids towards Fire-Safe Epoxy Resin Nanocomposites. Polymers 2019, 11, 229.

Lu Liu,Wei Wang,Yongqian Shi,Libi Fu,Lulu Xu,Bin Yu

DOI: https://doi.org/10.3390/polym11040724

IF: 5

2019-01-01

Polymers

Abstract:The authors wish to make a change to the published paper [...]
Correction: Improvements in properties of polybenzoxazine-based laser-induced graphene (LIG) by alloying with polyimide and modeling of production process

Ibrahim Lawan,Panuwat Luengrojanakul,Krittapas Charoensuk,Hariharan Argunam,Cheol-Hee Ahn,Sarawut Rimdusit

DOI: https://doi.org/10.1039/d4na90069c

IF: 5.598

2024-06-22

Nanoscale Advances

Abstract:Correction for 'Improvements in properties of polybenzoxazine-based laser-induced graphene (LIG) by alloying with polyimide and modeling of production process' by Ibrahim Lawan et al. , Nanoscale Adv. , 2024, 6 , 1556–1564, https://doi.org/10.1039/D3NA01026K.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Erratum To: Volume 5, Issue 4, December 2016

Li Zhang,Jie Zhang,Zhenxing Yue,Longtu Li,Rui Guo,Jianquan Qi,Jian Luo,Xiaoyu Dong,Xiangming Kong,Yawei Hu,Xiaofang Wang,Wei Pan,Yongqiang Chen,Bingbing Fan,Gang Shao,Rui Zhang,Hongfang Shen,Youjun Lu,Yanmin Wang,Zhidong Pan,Guozhong Cao,Zhun Hu,Guoli Fang,Bharathi Ponraj,Rajasekhar Bhimireddi,K. B. R. Varma,Jiaxin Wen,Zhipeng Xie,Wenbin Cao,Xianfeng Yang,Xiang Sun,Hong Zhang,Liu Ya,Jia Guo,Zhicheng Li,Chunlong Guan,Ninghui Sun,Manisha Upasani

DOI: https://doi.org/10.1007/s40145-017-0219-3

IF: 11.534

2017-01-01

Journal of Advanced Ceramics

Abstract:Unfortunately all articles of Vol. 5, Issue 4 were originally published online non-open access. This has since been corrected. The publisher would like to apologize to the Journal of Advanced Ceramics, the authors of the articles, and the readers.
Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

J F Zhou,C Y Liu,K Z He,X X Wei

DOI: https://doi.org/10.1016/j.heliyon.2024.e28814

IF: 3.776

2024-03-30

Heliyon

Abstract:[This corrects the article DOI: 10.1016/j.heliyon.2024.e24428.].
Erratum to: Determination of Yield Strength of Single-Crystals with a Hexagonal Lattice at a Given Strain Tensor and Hydrostatic Pressure

A. G. Kesarev,A. M. Vlasova

DOI: https://doi.org/10.3103/s0025654423800026

2024-02-04

Mechanics of Solids

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S0025654423800026

mechanics
Erratum To: Editorial

Chang-Jiu Li,Seiji Kuroda,Masahiro Fukumoto,Khiam Aik Khor,Changhee Lee,You Wang

DOI: https://doi.org/10.1007/s11666-010-9581-1

IF: 2.839

2010-01-01

Journal of Thermal Spray Technology

Abstract:Chang-Jiu Li, Xi an Jiaotong University, Xi an, Shaanxi, China; Seiji Kuroda, National Institute of Materials Science, Tsukuba, Ibaraki, Japan; Masahiro Fukumoto, Toyohashi University of Technology, Toyohashi, Aichi, Japan; Khiam Aik Khor, Nanyang Technological University, Singapore, Singapore; Changhee Lee, Hanyang University, Seoul, Korea; and You Wang, Harbin Institute of Technology, Harbin, Heilongjiang, China. JTTEE5 19:1148 Erratum DOI: 10.1007/s11666-010-9581-1 1059-9630/$19.00 ASM International

Erratum to: Wire Arc Additive Manufacturing: Influence of Production Parameters on Layer Geometry

Erratum to: Production of Machine Tools for the Aircraft Industry: Import Substitution

Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Erratum to: Web Laboratory for Supercomputer Modeling of Spraying Processes

Erratum to: Description of full-range strain hardening behavior of steels

Erratum: Publisher's Note: "A suspended layer additive manufacturing approach to the bioprinting of tri-layered skin equivalents" [APL Bioeng. 5, 046103 (2021)]

Erratum to: A Magnetic Field-Controlled Elastomer Composite Based on Porous Polydimethylsiloxane

Corrigendum to: Mechanical properties and wear-corrosion resistance of a new compound extrusion process for magnesium alloy AZ61

Erratum to: Atom Probe Tomography of High-Entropy Alloy AlCoCrFeNi

Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array: erratum

Correction: Thermoelectric Nanowires for Dense 3D Printed Architectures.

Erratum: “Data-Driven Design Space Exploration and Exploitation for Design for Additive Manufacturing” [ASME J. Mech. Des. 2019, 141(10), P. 101101; DOI: 10.1115/1.4043587]

Numerical Analysis on the Effect of Process Parameters on Deposition Geometry in Wire Arc Additive Manufacturing

Erratum to “Reliability Improvement of GaN Devices on Free-Standing GaN Substrates”

Erratum: Electrostatic-Interaction-Driven Assembly of Binary Hybrids towards Fire-Safe Epoxy Resin Nanocomposites. Polymers 2019, 11, 229.

Correction: Improvements in properties of polybenzoxazine-based laser-induced graphene (LIG) by alloying with polyimide and modeling of production process

Erratum To: Volume 5, Issue 4, December 2016

Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

Erratum to: Determination of Yield Strength of Single-Crystals with a Hexagonal Lattice at a Given Strain Tensor and Hydrostatic Pressure

Erratum To: Editorial