Erratum to: A Magnetic Field-Controlled Elastomer Composite Based on Porous Polydimethylsiloxane

A. A. Amirov,A. S. Kaminskiy,E. A. Arkhipova,N. A. Cherkasova,A. O. Tovpinets,V. N. Leucine,A. P. Pyatakov,V. E. Zhivulin,V. V. Rodionova

DOI: https://doi.org/10.3103/s1062873823350010

2023-10-25

Bulletin of the Russian Academy of Sciences Physics

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S1062873823350010

English Else

What problem does this paper attempt to address?

Erratum to: Permalloy-Based 2D-Magnetoplasmonic Crystals: Synthesis and Magneto-Optical Properties

Z. A. Grigoreva,D. V. Murzin,Ch. A. Gritsenko,A. G. Kozlov,A. V. Ognev,V. V. Rodionova,V. K. Belyaev

DOI: https://doi.org/10.1134/s0031918x24550015

2024-05-10

The Physics of Metals and Metallography

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S0031918X24550015

metallurgy & metallurgical engineering
Erratum to “Simultaneous effects of magnetic field and space porosity on compressible Maxwell fluid transport induced by a surface acoustic wave in a microchannel”

Khaled S. Mekheimer,Soliman R. Komy,Sara I. Abdelsalam

DOI: https://doi.org/10.1088/1674-1056/ac2252

2021-09-01

Chinese Physics B

Abstract:We would like to acknowledge the misprinted terms in our published paper “Simultaneous effects of magnetic field and space porosity on compressible Maxwell fluid transport induced by a surface acoustic wave in a microchannel” [ Chin. Phys. B 22 124702 (2013)]. Since only two misprints exist and the main results of the published paper are correct, we present the correct equations in this erratum.

physics, multidisciplinary
Erratum: Publisher's Note: "Magneto-responsive hyaluronan hydrogel for hyperthermia and bioprinting: Magnetic, rheological properties and biocompatibility" [APL Bioeng. 7, 036113 (2023)]

L Vítková,N Kazantseva,L Musilová,P Smolka,K Valášková,K Kocourková,M Humeník,A Minařík,P Humpolíček,A Mráček,I Smolková

DOI: https://doi.org/10.1063/5.0207818

2024-03-19

Abstract:[This corrects the article DOI: 10.1063/5.0147181.].
Erratum: Polozov, I., et al. Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders. Materials 2020, 13, 1766

Igor Polozov,Nikolay Razumov,Dmitriy Masaylo,Alexey Silin,Yuliya Lebedeva,Anatoly Popovich

DOI: https://doi.org/10.3390/ma13112630

IF: 3.4

2020-06-09

Materials

Abstract:The authors wish to make the following correction to this paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Correction: Corrigendum: on the Speed of Piezostrain-Mediated Voltage-Driven Perpendicular Magnetization Reversal: a Computational Elastodynamics-Micromagnetic Phase-Field Study

Peng, Ren-Ci,Hu, Jia-Mian,Chen, Long-Qing,Nan, Ce-Wen

DOI: https://doi.org/10.1038/am.2017.193

IF: 10.761

2017-01-01

NPG Asia Materials

Abstract:After online publication of this article, the authors noticed a typographical error in the main text under the Methods section. On the bottom right of Page 3, the original text ‘…, c12=93.46 × 1011 GPa …’ should read as ‘…, c12=93.46 GPa …’ The authors apologize for any inconvenience caused. The error has been corrected in the HTML and PDF versions of the article.
Correction: Shah, M.I., Et Al. Properties of Electrospun Nanofibers of Multi-Block Copolymers of [Poly-Ε-caprolactone-b-poly(tetrahydrofuran-co-ε-caprolactone)]m Synthesized by Janus Polymerization. Polymers 2017, 9, 559

Muhammad Ijaz Shah,Zhening Yang,Yao Li,Liming Jiang,Jun Ling

DOI: https://doi.org/10.3390/polym13010111

IF: 5

2020-01-01

Polymers

Abstract:The authors wish to make the following changes to the published paper as listed below [...].
Erratum to: Brillouin Scattering Study of Gelatin Films with Different Water Concentrations

A. V. Laktionova,E. A. Dobrynina,V. A. Zykova,N. V. Surovtsev

DOI: https://doi.org/10.1134/s1062873824010027

2024-03-15

Bulletin of the Russian Academy of Sciences Physics

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1062873824010027
Publisher Correction: An electrically conductive silver–polyacrylamide–alginate hydrogel composite for soft electronics

Yunsik Ohm,Chengfeng Pan,Michael J. Ford,Xiaonan Huang,Jiahe Liao,Carmel Majidi

DOI: https://doi.org/10.1038/s41928-021-00571-3

IF: 33.255

2021-03-31

Nature Electronics

Abstract:A Correction to this paper has been published: https://doi.org/10.1038/s41928-021-00571-3.

engineering, electrical & electronic
Erratum: Publisher's Note: "Magnetic force-based cell manipulation for in vitro tissue engineering" [APL Bioeng. 7, 031504 (2023)]

Huiqian Hu,L Krishaa,Eliza Li Shan Fong

DOI: https://doi.org/10.1063/5.0181312

2023-10-20

Abstract:[This corrects the article DOI: 10.1063/5.0138732.].
Erratum to: Vortex Dynamics in Superconducting MoN Strip with a Side Cut

S. S. Ustavschikov,M. Yu. Levichev,I. Yu. Pashen’kin,N. S. Gusev,S. A. Gusev,D. Yu. Vodolazov

DOI: https://doi.org/10.1134/s1063776123110171

2024-01-14

Journal of Experimental and Theoretical Physics

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1063776123110171

physics, multidisciplinary
Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

Chunzi Zhang,Ozan Gunes,Yuanshi Li,Xiaoyu Cui,Masoud Mohammadtaheri,Shi-Jie Wen,Rick Wong,Qiaoqin Yang,Safa Kasap

DOI: https://doi.org/10.3390/ma13225132

IF: 3.4

2020-11-13

Materials

Abstract:The authors would like to correct a typographical error in their paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Correction to "β-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends"

Toby R Edwards,Rahul Shankar,Paul G H Smith,Jacob A Cross,Zoe A B Lequeux,Lisa K Kemp,Zhe Qiang,Scott T Iacono,Sarah E Morgan

DOI: https://doi.org/10.1021/acsapm.4c01719

2024-06-20

Abstract:[This corrects the article DOI: 10.1021/acsapm.4c00468.].
Correction to “TPMS Contactors Designed with Imprinted Porosity: Numerical Evaluation of Momentum and Energy Transport”

Mohammad Asif,Carlos A. Grande

DOI: https://doi.org/10.1021/acs.iecr.3c00958

2023-04-05

Industrial & Engineering Chemistry Research

Abstract:[This corrects the article DOI: 10.1021/acs.iecr.2c03384.].

engineering, chemical
Erratum: Corrigendum: Magnetization Reversal by Out-of-plane Voltage in BiFeO3-based Multiferroic Heterostructures

J. J. Wang,J. M. Hu,Ren-Ci Peng,Y. Gao,Y. Shen,L. Q. Chen,C. W. Nan

DOI: https://doi.org/10.1038/srep21443

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Scientific Reports 5: Article number:10459; published online: 21 May 2015; updated: 23 February 2016 This Article contains a typographical error in a grant number in the Acknowledgements section. “This work was supported by the NSF of China (Grant Nos 11234005, 51332001, 51221291, and 51472140), andthe NSF (Grant No: DMR-1410714, DMR-0820404, and DMR-1210588).
Correction: An ultrasound-induced MXene doped PAM–SA super-tough hydrogel

Keyi Li,Yong Liu,Yaqing Ge,Hongyan Cao,Shujuan Zhuang,Xueting Yang,Yanyan Zhao,Xiangling Gu

DOI: https://doi.org/10.1039/d3tc90038j

IF: 6.4

2023-02-17

Journal of Materials Chemistry C

Abstract:Correction for 'An ultrasound-induced MXene doped PAM–SA super-tough hydrogel' by Keyi Li et al. , J. Mater. Chem. C , 2023, 11 , 1908–1918, https://doi.org/10.1039/D2TC04665B.

materials science, multidisciplinary,physics, applied
Correction: An amorphous Cr2Ge2Te6/polyimide double-layer foil with an extraordinarily outstanding strain sensing ability

Yinli Wang,Yi Shuang,Mihyeon Kim,Daisuke Ando,Fumio Narita,Yuji Sutou

DOI: https://doi.org/10.1039/d4mh90105c

2024-11-11

Abstract:Correction for 'An amorphous Cr2Ge2Te6/polyimide double-layer foil with an extraordinarily outstanding strain sensing ability' by Yinli Wang et al., Mater. Horiz., 2024, https://doi.org/10.1039/d4mh00616j.
Erratum to: Wire Arc Additive Manufacturing: Influence of Production Parameters on Layer Geometry

A. A. Snezhko,O. R. Luzanov,V. I. Kirillov,A. A. Fadeev,L. A. Martynova,O. V. Shcherbina

DOI: https://doi.org/10.3103/s1068798x2402031x

2024-04-28

Russian Engineering Research

Abstract:An Erratum to this paper has been published: https://doi.org/10.3103/S1068798X2402031X

English Else
Correction: Robust magnetic double-network hydrogels with self-healing, MR imaging, cytocompatibility and 3D printability

Fangli Gang,Hao Yan,Chunyang Ma,Le Jiang,Yingying Gu,Ziyu Liu,Lingyun Zhao,Xiumei Wang,Jiwen Zhang,Xiaodan Sun

DOI: https://doi.org/10.1039/c9cc90441g

IF: 4.9

2019-01-01

Chemical Communications

Abstract:Correction for ‘Robust magnetic double-network hydrogels with self-healing, MR imaging, cytocompatibility and 3D printability’ by Fangli Gang et al., Chem. Commun., 2019, 55, 9801–9804.
Erratum: Nonlinear Elastic Behavior of Two-Dimensional Molybdenum Disulfide [phys. Rev. B87, 035423 (2013)]

Ryan C. Cooper,Changgu Lee,Chris A. Marianetti,Xiaoding Wei,James Hone,Jeffrey W. Kysar

DOI: https://doi.org/10.1103/physrevb.88.039906

IF: 3.7

2013-01-01

Physical Review B

Abstract:Received 30 January 2013DOI:https://doi.org/10.1103/PhysRevB.87.079901©2013 American Physical Society
Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Yihui Zhang,Fan Zhang,Zheng Yan,Qiang Ma,Xiuling Li,Yonggang Huang,John A. Rogers

DOI: https://doi.org/10.1038/natrevmats.2017.29

IF: 83.5

2017-01-01

Nature Reviews Materials

Abstract:Nature Reviews Materials 2, 17019 (2017) In the originally published version of this article, there was an error in the Acknowledgements section. This has been corrected in both the HTML and PDF versions.

Erratum to: A Magnetic Field-Controlled Elastomer Composite Based on Porous Polydimethylsiloxane

Erratum to: Permalloy-Based 2D-Magnetoplasmonic Crystals: Synthesis and Magneto-Optical Properties

Erratum to “Simultaneous effects of magnetic field and space porosity on compressible Maxwell fluid transport induced by a surface acoustic wave in a microchannel”

Erratum: Publisher's Note: "Magneto-responsive hyaluronan hydrogel for hyperthermia and bioprinting: Magnetic, rheological properties and biocompatibility" [APL Bioeng. 7, 036113 (2023)]

Erratum: Polozov, I., et al. Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders. Materials 2020, 13, 1766

Correction: Corrigendum: on the Speed of Piezostrain-Mediated Voltage-Driven Perpendicular Magnetization Reversal: a Computational Elastodynamics-Micromagnetic Phase-Field Study

Correction: Shah, M.I., Et Al. Properties of Electrospun Nanofibers of Multi-Block Copolymers of [Poly-Ε-caprolactone-b-poly(tetrahydrofuran-co-ε-caprolactone)]m Synthesized by Janus Polymerization. Polymers 2017, 9, 559

Erratum to: Brillouin Scattering Study of Gelatin Films with Different Water Concentrations

Publisher Correction: An electrically conductive silver–polyacrylamide–alginate hydrogel composite for soft electronics

Erratum: Publisher's Note: "Magnetic force-based cell manipulation for in vitro tissue engineering" [APL Bioeng. 7, 031504 (2023)]

Erratum to: Vortex Dynamics in Superconducting MoN Strip with a Side Cut

Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

Correction to "β-Phase Crystallinity, Printability, and Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF)/Poly(methyl methacrylate) (PMMA)/Cyclopentyl-polyhedral Oligomeric Silsesquioxane (Cp-POSS) Melt-Compounded Blends"

Correction to “TPMS Contactors Designed with Imprinted Porosity: Numerical Evaluation of Momentum and Energy Transport”

Erratum: Corrigendum: Magnetization Reversal by Out-of-plane Voltage in BiFeO3-based Multiferroic Heterostructures

Correction: An ultrasound-induced MXene doped PAM–SA super-tough hydrogel

Correction: An amorphous Cr2Ge2Te6/polyimide double-layer foil with an extraordinarily outstanding strain sensing ability

Erratum to: Wire Arc Additive Manufacturing: Influence of Production Parameters on Layer Geometry

Correction: Robust magnetic double-network hydrogels with self-healing, MR imaging, cytocompatibility and 3D printability

Erratum: Nonlinear Elastic Behavior of Two-Dimensional Molybdenum Disulfide [phys. Rev. B87, 035423 (2013)]

Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials