Erratum to: Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti–6Al–4V Alloy

Chauhan, Amit Kumar Singh

DOI: https://doi.org/10.1134/s1061830924070015

2024-10-17

Russian Journal of Nondestructive Testing

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1061830924070015

materials science, characterization & testing

What problem does this paper attempt to address?

Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti–6A1–4V Alloy

Chauhan, Amit Kumar Singh

DOI: https://doi.org/10.1134/s1061830924601533

2024-08-25

Russian Journal of Nondestructive Testing

Abstract:Ti–6Al–4V alloy is used in high-temperature aerospace applications such as aircraft turbine discs, airframes, and other structural parts. Solid particle erosion is quite common in aerospace components. In the present work, a study has been conducted to see the effect of solid particle erosion on Ti–6Al–4V alloy fabricated by direct metal laser sintering. The fabricated sample was characterized using optical microscopy and scanning electron microscopy. It was observed that a long martensitic phase structure (in the form of α/α' laths) was retained since the heat treatment temperature was far below the β transus value. Using the Taguchi experimental approach, the SPE tests were conducted for different impact angles, velocities, and temperatures. This approach optimized the number of experiments for measuring the erosion rate and predicted the most influencing variable in the test. The scanning electron microscopy technique was also used to characterize the eroded sample. The effect of impact velocity dominated the erosion behaviour of Ti–6Al–4V alloy, followed by temperature and impact angle. At highest temperature of 650 K, erosion rate decreased with an increase in impact angle and increased with an increase in impact velocity. This study aims to identify the optimal parameter combination to minimize the erosion rate.

materials science, characterization & testing
Correction: Tang, L. et al., Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy. Materials 2020, 13, 3858

Luyao Tang,Jiangkun Fan,Hongchao Kou,Bin Tang,Jinshan Li

DOI: https://doi.org/10.3390/ma13235364

IF: 3.4

2020-11-26

Materials

Abstract:The author wishes to make the following correction to this paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Erratum to: Atom Probe Tomography of High-Entropy Alloy AlCoCrFeNi

S. V. Rogozhkin,A. S. Shutov,A. A. Khomich,A. A Nikitin,A. A. Lukyanchuk,O. A. Raznitsyn,L. Meshi

DOI: https://doi.org/10.1134/S1063778821330012

2022-02-27

Physics of Atomic Nuclei

Abstract:An Erratum to this paper has been published: https://doi.org/10.1134/S1063778821330012

physics, particles & fields, nuclear
Erratum: Corrigendum: Kinetic ways of tailoring phases in high entropy alloys

Feng He,Zhijun Wang,Yiyan Li,Qingfeng Wu,Junjie Li,Jincheng Wang,C. T. Liu

DOI: https://doi.org/10.1038/srep46914

IF: 4.6

2017-01-01

Scientific Reports

Abstract:Scientific Reports 6: Article number: 34628; published online: 30 September 2016; updated: 22 December 2017. This Article contains an error in the Experimental section. “Elements of Co, Cr, Fe, Ni and Nb with purity of 99.95% were used as raw materials”. should read: “Elements of Co, Cr, Fe, Ni and Ti with purity of 99.
Corrigendum to “Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels”[Mater. Sci. Eng. A 712 (2018) 548–563 …

Quan Lai, Ralph Abrahams, Wenyi Yan, Cong Qiu, Peter Mutton, Anna Paradowska, Xiya Fang, Mehdi Soodi, Xinhua Wu

2019-01-10

Abstract:The authors regret that the scale bar was missing from Figure 7. This has now been corrected and Figure 7 appears correctly as below: The authors would like to apologise for any inconvenience caused.
Correction To: Process Parameter Selection for Selective Laser Melting of Ti6Al4V Based on Temperature Distribution Simulation and Experimental Sintering

Bo Song,Shunxi Dong,Hanlin Liao,Christian Coddet

DOI: https://doi.org/10.1007/s00170-019-04741-8

2019-01-01

Abstract:The authors regret to inform that a missing reference [27] should be marked in the caption of Fig. 6(a) in the published paper.
Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Fang‐Ze Li,Gen-Wen Hsieh,S. H. Dalal,Mary Newton,J.E. Stott,Pritesh Hiralal,Arokia Nathan,P. A. Warburton,Hüsnü Emrah Ünalan,Paul Beecher,Andrew J. Flewitt,Ian Robinson,G.A.J. Amaratunga,W. I. Milne

DOI: https://doi.org/10.1109/ted.2008.2010442

2009-01-01

Abstract:In our paper [F.M. Li et al., 2008], two errors were noticed after the paper went to press. On page 3002, near the middle of the left column, it should say "In this method, zinc oxide and carbon powders are mixed together, usually in a ZnO:C ratio of 1: 1 or 1:4 by weight." In Fig. 8, on page 3005, the x-axis label should say "energy (eV)" instead of "wavelength (eV)." Also, this paper should have been designated as Invited, as it is now above.
Correction to: Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures

Hua-De Zheng,Li-Li Liu,Chun-Lin Deng,Zhi-Feng Shi,Cheng-Yun Ning

DOI: https://doi.org/10.1007/s12598-019-01304-4

IF: 6.318

2019-01-01

Rare Metals

Abstract:In the original publication, incorrect version of Table 5 has been published.
Erratum To: New High-Strength Ti−Al−V−Mo Alloy: from High-Throughput Composition Design to Mechanical Properties

Di Wu,Wan-lin Wang,Li-gang Zhang,Zhen-yu Wang,Ke-chao Zhou,Li-bin Liu

DOI: https://doi.org/10.1007/s12613-019-1940-4

2020-01-01

Abstract:The original version of this article unfortunately contained a mistake.
Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Yihui Zhang,Fan Zhang,Zheng Yan,Qiang Ma,Xiuling Li,Yonggang Huang,John A. Rogers

DOI: https://doi.org/10.1038/natrevmats.2017.29

IF: 83.5

2017-01-01

Nature Reviews Materials

Abstract:Nature Reviews Materials 2, 17019 (2017) In the originally published version of this article, there was an error in the Acknowledgements section. This has been corrected in both the HTML and PDF versions.
Erratum To: Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting

G. Vastola,G. Zhang,Q. X. Pei,Y.-W. Zhang

DOI: https://doi.org/10.1007/s11837-016-1990-2

2016-01-01

JOM

Abstract:Beam-based additive manufacturing (AM) is an innovative technique in which parts are built layerwise, starting from the material in powder form. As a developing manufacturing technique, achievement of excellent mechanical properties in the final part is of paramount importance for the mainstream adoption of this technique in industrial manufacturing lines. At the same time, AM offers an unprecedented opportunity to precisely control the manufacturing conditions locally within the part during build, enabling local influence on the formation of the texture and microstructure. In order to achieve the control of microstructure by tailoring the AM machine parameters, a full understanding and modeling of the heat transfer and microstructure evolution processes is needed. Here, we show the implementation of the non-equilibrium equations for phase formation and dissolution in an AM modeling framework. The model is developed for the Ti6Al4V alloy and allows us to show microstructure evolution as given by the AM process. The developed capability is applied to the cases of electron beam melting and selective laser melting AM techniques to explain the significantly different microstructures observed in the two processes.
Erratum to “femtosecond Laser Direct Ablating Micro/Nanostructures and Micropatterns on CH 3 NH 3 PbI 3 Single Crystal” [apr 17 Art. No. 2400110]

Chao-Wei Wang,Yang-Yang Dang,Ya-Hui Su,Jin-Cheng Ni,Chen-Chu Zhang,Jia-Wen Li,Yan-Lei Hu,Jia-Ru Chu,Wen-Hao Huang,Dong Wu,Xu-Tang Tao

DOI: https://doi.org/10.1109/jphot.2019.2910564

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:Presents corrections to the paper, "Femtosecond laser direct ablating micro/nanostructures and micropatterns on CH3NH3PbI3 single crystal" (Wang, C.W., et al), IEEE Photon. J., vol. 9, no. 2, Apr. 2017, Art. no. 2400110.
Erratum to “Femtosecond Laser Direct Ablating Micro/Nanostructures and Micropatterns on CH3NH3PbI3 Single Crystal” [Apr 17 Art. no. 2400110]

Chao-Wei Wang,Yang-Yang Dang,Ya-Hui Su,Jin-Cheng Ni,Chen-Chu Zhang,Jia-Wen Li,Yan-Lei Hu,Jia-Ru Chu,Wen-Hao Huang,Dong Wu,Xu-Tang Tao

DOI: https://doi.org/10.1109/JPHOT.2019.2910564

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:Presents corrections to the paper, "Femtosecond laser direct ablating micro/nanostructures and micropatterns on CH3NH3PbI3 single crystal" (Wang, C.W., et al), IEEE Photon. J., vol. 9, no. 2, Apr. 2017, Art. no. 2400110.
Correction To: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Shaolou Wei,Lujun Huang,Xinting Li,Yang Jiao,Wei Ren,Lin Geng

DOI: https://doi.org/10.1007/s11661-019-05606-1

2020-01-01

Metallurgical and Materials Transactions A

Abstract:In the original article, there is an error in Figure 1. The unit of Specific strength should be MPa/(g•cm-3). Following is the corrected figure:
Correction: Corrigendum: Kinetic Ways of Tailoring Phases in High Entropy Alloys

Feng He,Zhijun Wang,Yiyan Li,Qingfeng Wu,Junjie Li,Jincheng Wang,C. T. Liu

DOI: https://doi.org/10.1038/srep46914

IF: 4.6

2017-01-01

Scientific Reports

Abstract:Scientific Reports 6: Article number: 34628; published online: 30 September 2016; updated: 22 December 2017. This Article contains an error in the Experimental section. “Elements of Co, Cr, Fe, Ni and Nb with purity of 99.95% were used as raw materials”. should read: “Elements of Co, Cr, Fe, Ni and Ti with purity of 99.
Correction for the Research Article: “High thermal conductivity in electrostatically engineered amorphous polymers” by A. Shanker, C. Li, G. Kim, D. Gidley, K. P. Pipe and J. Kim

DOI: https://doi.org/10.1126/sciadv.aau4831

IF: 13.6

2018-07-06

Science Advances

Abstract:[This corrects the article DOI: 10.1126/sciadv.1700342.].

multidisciplinary sciences
Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

Chunzi Zhang,Ozan Gunes,Yuanshi Li,Xiaoyu Cui,Masoud Mohammadtaheri,Shi-Jie Wen,Rick Wong,Qiaoqin Yang,Safa Kasap

DOI: https://doi.org/10.3390/ma13225132

IF: 3.4

2020-11-13

Materials

Abstract:The authors would like to correct a typographical error in their paper [...]

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Erratum to “Influence of texture on beta grain growth during continuous annealing of Ti–6Al–4V”

S. L. Semiatin,P. N. Fagin,M.G. Glavicic,I.M. Sukonnik,Orest M. Ivasishin

DOI: https://doi.org/10.1016/s0921-5093(01)01432-0

2001-01-01

Abstract:a Air Force Research Laboratory, Materials and Manufacturing Directorate, AFRL/MLLM, Wright-Patterson Air Force Base, OH 45433-7817, USA b UES, 4401 Dayton-Xenia Road, Dayton, OH 45432-1894, USA c Lambda Research, 5521 Fair Lane, Cincinnati, OH 45227, USA d Texas Instruments, 34 Forest Street, Attleboro, MA 02703, USA e Institute for Metal Physics, National Academy of Sciences of Ukraine, 36 Vernadsky Street, Kie 252142, Ukraine
Erratum: Au/Ni12P5 core/shell nanocrystals from bimetallic heterostructures: in situ synthesis, evolution and supercapacitor properties

Duan, Sibin,Wang, Rongming

DOI: https://doi.org/10.1038/am.2015.25

IF: 10.761

2015-01-01

NPG Asia Materials

Abstract:Correction to: NPG Asia Materials (2014) 6, e122; doi:10.1038/am.2014.65; published online 5 September 2014 The ‘e’ number was incorrect in the PDF version. It should be e122 instead of e00. The correct citation to this article should be read as below: NPG Asia Materials (2014) 6, e122; doi:10.1038/am.
Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Wang Haibo,Song Guolin,Tang Guoyi

DOI: https://doi.org/10.1016/j.msea.2017.05.119

2017-01-01

Abstract:The authors regret that Fig. 12C is not appearing correctly, and should be replaced with the following: The authors would like to apologise for any inconvenience caused. © 2017

Erratum to: Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti–6Al–4V Alloy

Solid Particle Erosion Behaviour of Laser Sintered Heat Treated Ti–6A1–4V Alloy

Correction: Tang, L. et al., Effect of Oxygen Variation on High Cycle Fatigue Behavior of Ti-6Al-4V Titanium Alloy. Materials 2020, 13, 3858

Erratum to: Atom Probe Tomography of High-Entropy Alloy AlCoCrFeNi

Erratum: Corrigendum: Kinetic ways of tailoring phases in high entropy alloys

Corrigendum to “Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels”[Mater. Sci. Eng. A 712 (2018) 548–563 …

Correction To: Process Parameter Selection for Selective Laser Melting of Ti6Al4V Based on Temperature Distribution Simulation and Experimental Sintering

Corrections to “zinc Oxide Nanostructures and High Electron Mobility Nanocomposite Thin Film Transistors” [nov 08 3001-3011

Correction to: Mechanical properties of AM Ti6Al4V porous scaffolds with various cell structures

Erratum To: New High-Strength Ti−Al−V−Mo Alloy: from High-Throughput Composition Design to Mechanical Properties

Erratum: Corrigendum: Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Erratum To: Modeling the Microstructure Evolution During Additive Manufacturing of Ti6Al4V: A Comparison Between Electron Beam Melting and Selective Laser Melting

Erratum to “femtosecond Laser Direct Ablating Micro/Nanostructures and Micropatterns on CH 3 NH 3 PbI 3 Single Crystal” [apr 17 Art. No. 2400110]

Erratum to &#x201C;Femtosecond Laser Direct Ablating Micro/Nanostructures and Micropatterns on CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Single Crystal&#x201D; [Apr 17 Art. no. 2400110]

Correction To: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Correction: Corrigendum: Kinetic Ways of Tailoring Phases in High Entropy Alloys

Correction for the Research Article: “High thermal conductivity in electrostatically engineered amorphous polymers” by A. Shanker, C. Li, G. Kim, D. Gidley, K. P. Pipe and J. Kim

Erratum: Zhang, C. et al., The Effect of Substrate Biasing during DC Magnetron Sputtering on the Quality of VO2 Thin Films and Their Insulator–Metal Transition Behavior. Materials 2019, 12, 2160

Erratum to “Influence of texture on beta grain growth during continuous annealing of Ti–6Al–4V”

Erratum: Au/Ni12P5 core/shell nanocrystals from bimetallic heterostructures: in situ synthesis, evolution and supercapacitor properties

Corrigendum to “Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process” [Mater. Sci. Eng. A 662 (2016) 456–467] (S0921509316303148) (10.1016/j.msea.2016.03.097))

Erratum to “Femtosecond Laser Direct Ablating Micro/Nanostructures and Micropatterns on CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> Single Crystal” [Apr 17 Art. no. 2400110]