Biogas upgrading by intensified methanation (SESaR): reaction plus water adsorption - desorption cycles with Ni-Fe/Al 2 O 3 catalyst and LTA 5 A zeolite

Víctor Daniel Mercader,Paúl Durán,Pablo Aragüés-Aldea,Eva Francés,Javier Herguido,Jose-Angel Peña
DOI: https://doi.org/10.2139/ssrn.4676857
IF: 5.3
2024-03-28
Catalysis Today
Abstract:This work is conducted within the framework of the Power to Gas ( PtG ) technologies, focusing on the topic of " biogas upgrading ". The objective is to enhance the CH 4 content of biogas streams by utilizing the CO 2 present in these streams through the Sabatier reaction, thereby producing a renewable alternative to natural ( fossil ) gas. Referred to as " SESaR" ( Sorption Enhanced Sabatier Reaction ), this process employs a catalytic fixed-bed reactor, featuring selective water adsorption using LTA 5 A zeolites, as an innovative approach to traditional methanation reactors. The catalyst used comprises Ni-Fe (7.5:2.5 wt / wt ) as the active metallic phase supported on γ-Al 2 O 3 . Experimental work has been divided in two sets of trials. The first set focuses on the hydrogenation of CO 2 as single reactant (H 2 also supplied in the inlet with 4:1 = H 2 :CO 2 molar ratio). The second set of experiments was carried out with a synthetic gas mixture representative of a sweetened biogas stream (molar ratio CH 4 :CO 2 = 7:3). Maximum intensification behavior for CO 2 conversion was found at 350 °C, also showing that CH 4 presence in the inlet gas has negligible influence on the conversion of CO 2 . Selectivity to CO is minimized at temperatures exceeding 300 °C and remains constant after three consecutive cycles of methanation, water adsorption, and desorption. The Fe-Ni catalyst has demonstrated sustained performance throughout the experimental cycles, exhibiting no significant loss of activity.
chemistry, physical,engineering, chemical, applied
What problem does this paper attempt to address?