Abstract:The development of society is dependent on commodities such as fuels and chemical feedstock. Most of these commodities are obtained from oil as raw material. Although the need to find a friendly solution to couple an economically viable energy model with a greener solution, it is known that technologies applying renewable sources are in an early stage of development. The conversion of methane into clean fuels or chemical feedstock with high commercial value, such as hydrogen, ethylene, or methanol is interesting from the energetic and economic point-of-view. Among the methods of methane conversion, the industrially used is the steam reforming (MSR), in which methane reacts with water to produce syngas, a mixture of CO and H2. Nevertheless, this reaction is highly endothermic and responsible for a large volume of CO2 emitted by the reactor burners that provide energy to the reactors. An interesting alternative process for methane conversion is the dry reforming of methane (DRM), which consists of the reaction of methane with CO2, also yielding syngas. The advantage of this reaction is the utilization of two harmful gases to the atmosphere. The disadvantage of this reaction is due to the catalyst deactivation by carbon deposition. In heterogeneous catalysis, there is a strong relationship between catalytic performance and surface and textural properties, that are outlined by the number and distribution of available active sites. In this way, different synthetic routes may be used to design these properties and obtain products of commercial interest, such as ethylene. The commercial production of ethylene occurs by the recuperation of refinery gases, thermal cracking of light hydrocarbons, mainly ethane and propane, or a combination of both processes. An alternative process of ethylene production may be from natural gas and or biogas. This process can be performed by the syngas route or by oxidative coupling of methane (OCM). The first process is an indirect conversion of methane and involves several steps, which increases the process costs. The second one is a direct conversion, where methane is directly converted into C2 (ethane and ethylene) hydrocarbons. Although the OCM is not yet a reaction on an industrial scale, several efforts are being made to design a catalytic system to achieve C2 hydrocarbons yields above 30%, the minimum required. Besides that, another technology has been studied to directly produce ethylene via the oxidative coupling of methane using CO2 as a mild oxidant (CO2-OCM). These technological routes for the valorization of methane and CO2 will be addressed in this review.

Towards the Development of Syngas/Biomethane Electrolytic Production, Using Liquefied Biomass and Heterogeneous Catalyst

Bio-syngas Production from Biomass Catalytic Gasification

Biomass gasification, catalytic technologies and energy integration for production of circular methanol: New horizons for industry decarbonisation

Synthetic fuels and chemicals production from biomass synthesis gas

Renewable gases production coupled to synthetic wastewater treatment through a microbial electrolysis cell

Overall Insights into Sustainable Utilization of Methane and Carbon Dioxide in Heterogeneous Catalysis

Biomass-derived syngas production via gasification process and its catalytic conversion into fuels by Fischer Tropsch synthesis: A review

Enabling the Methanol Economy: Opportunities and Challenges for Heterogeneous Catalysis in the Production of Liquid Fuels via Methanol.

Reforming processes for syngas production: A mini-review on the current status, challenges, and prospects for biomass conversion to fuels

Direct Alkaline Anion Exchange Membrane Fuel Cell to Converting Methane into Methanol

Biogas upgrading by intensified methanation (SESaR): reaction plus water adsorption - desorption cycles with Ni-Fe/Al 2 O 3 catalyst and LTA 5 A zeolite

Steam reforming of biomass gasification gas for hydrogen production: From thermodynamic analysis to experimental validation

Biogas upgrading by intensified methanation (SESaR): Reaction plus water adsorption - desorption cycles with Ni-Fe/Al 2 O 3 catalyst and LTA 5A zeolite

Carbon Utilization Through Power to Gas and Oxyfuel Combustion Hybridization with Recycled CO2: Design and Preliminary Results

INDIRECT SYNTHESIS OF LPG FROM REFORMING BIOMASS SYNGAS

A Comprehensive Review of Syngas Production, Fuel Properties, and Operational Parameters for Biomass Conversion

Experimental Evaluation of a New Approach for a Two-Stage Hydrothermal Biomass Liquefaction Process

Feasibility Study on Combining Anaerobic Digestion and Biomass Gasification to Increase the Production of Biomethane

An Approach towards the Conversion of Biomass Feedstocks into Biofuel Using a Zeolite Socony Mobil-5-Based Catalysts via the Hydrothermal Liquefaction Process: A Review

Progress and Perspectives in Photo‐ and Electrochemical‐Oxidation of Biomass for Sustainable Chemicals and Hydrogen Production

Methane Upgrading of Acetic Acid as a Model Compound for a Biomass-Derived Liquid over a Modified Zeolite Catalyst