Abstract:• A new analytical solution is developed for pavement structures. • Cracks in the pavement structure and the horizontal friction are considered. • Solutions for the internal forces and deformations can be obtained efficiently. • The proposed solution allows for any crack positions and load distributions. Numerous studies have been conducted to determine the responses of pavement structures. However, general insufficiency and complex solution processes remain critical problems. Based on the state-space method and Euler–Bernoulli beam theory, this paper proposes a new analytical solution for the response of a pavement structure subjected to arbitrary loads. A joint model including tension–compression, shear, and bending springs that can reflect the stiffness degradation is introduced to simulate cracks in the pavement structure. In addition, an improved Winkler foundation model (considering both the horizontal friction between the beam and foundation soil as well as the vertical soil resistance) is used to simulate the subgrade properties. Analytical solutions for the deformations and internal forces of the pavement structure with cracks under arbitrary horizontal and vertical loads are obtained, and a corresponding MATLAB program is developed for the calculations. The performance of the proposed analytical solutions is verified using the finite element method. Furthermore, the effects of the bending stiffness, horizontal load, horizontal friction, ratio of the resistance coefficients of the horizontal and vertical springs, and crack position are discussed in detail. The results show that the horizontal braking force will cause rotations of the entire pavement structure, and the horizontal friction effect can effectively reduce the influence of the horizontal load on the deformation of the pavement structure. Cracks has a great effect on the deformation response of the pavement structure, which could not be ignored. Moreover, the proposed method exhibits high efficiency and generality for the analysis of pavement structures and can fully consider the effects of the aforementioned factors.

Finite element simulation and falling ball impact model for cement concrete pavement considering void under slab

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Analytical solution based on state-space method for cracked concrete pavement subjected to arbitrary concentrated loading

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

Influence of Supports on the Low-Velocity Impact Response of Square RC Slab of Standard Concrete and Ultra-High Performance Concrete: FEM-Based Computational Analysis

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

Vibration Serviceability Analysis of Floor Structures under Pedestrian Loads

Analysis of the Deep-Seated Concrete Slab for Settlement Control at Bridge Approach Embankment

Voids Prediction Beneath Cement Concrete Slabs Using a FEM-ANN Method

Wave propagation approach for dynamic responses of transversely isotropic viscoelastic pavement under impact load

Study on Modelling Method of Resilient Mat Used under Floating Slab Track

Simulation of Delamination Evolution of Slab Ballastless Track under Vertical Impact

Study of Void Detection Beneath Concrete Pavement Panels through Numerical Simulation

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

Investigation of Concrete Base-Roadbed Surface Contact Variation-Induced Vibration Characteristics of Vehicle-Slab Track-Subgrade System considering Fluid-Solid Interaction

Viscoelastic Response of Reflective Cracking under Dynamic Vehicle Loading in Asphalt Concrete Pavements

Validated Finite Element Modeling of Lightweight Concrete Floors Stiffened and Strengthened with FRP