Abstract:High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking (SCC) depending on temper and loading conditions. Both the alloy's grain structure and composition are believed to play a key role in determining sensitivity to SCC. Here, we study at the nanometer scale the evolution of the microstructure near stress corrosion cracks on two different model variants of the 7140 aluminum alloy. We performed double cantilever beam (DCB) crack growth tests in hot (70°C) humid air, on samples extracted at quarter-thickness (T/4) and mid-thickness (T/2) and heat treated to a non-industrial, SCC sensitive T6 condition. The sample at T/4 shows a lower KISCC along with flatter grains and a higher solute content, whereas both samples exhibit similar crack growth rates at higher stress intensities. We report on precipitate dissolution and matrix solute enrichment near the crack tips, with the T/4 position presenting the higher increase in solute levels. The near grain boundary microstructure ahead of the crack is modified, with evidence of precipitate dissolution and transport of solutes towards the stress-corrosion crack tip. These results agree with a recent report on another 7xxx Al-alloy after SCC in Cl-solution, supporting the possibility that these mechanisms are generally occurring. We relate our findings with the measured SCC behavior and provide an array of possible mechanisms that could be widely applicable in SCC of high strength Al-alloys.

Stress corrosion cracking susceptibility of a new nickel‐based alloy in different environments

Effect of different loading conditions on corrosion fatigue crack growth rate of a nickel-based alloy in supercritical water

Stress Corrosion Cracking of 60/40 Cupro-Nickel Alloy: Fractography and Chemical Analysis

Understanding the Effect of Nanosized NbC Precipitates on the Stress Corrosion Cracking of High-Strength Low-Alloy Steel in a Simulated Deep-Sea Environment

STRESS CORROSION CRACKING BEHAVIOR OF A NEW KIND OF ULTRAHIGH STRENGTH STEEL Cr12Ni4Mo2Co14 IN ACID ENVIRONMENT

Stress corrosion crack propagation affected by microstructures for nuclear steam turbine rotor steels in the simulated environment

Improved Stress Corrosion Cracking Resistance of High‐Strength Low‐Alloy Steel in a Simulated Deep‐Sea Environment via Nb Microalloying

Analysis of Stress Corrosion Cracking Growth Rate in the Heat-Affected Zone of 316L Based on the Heterogeneity of the Mechanical Properties

On the hydrogen embrittlement behavior of nickel-based alloys: Alloys 718 and 725

Nanoscale perspective on the stress-corrosion cracking behavior of a peak-aged 7XXX-Al alloy

Quantification of SCC mechanisms in austenitic alloys under PWR primary water conditions

Comparative study on the stress corrosion cracking of a new Ni-advanced high strength steel prepared by TMCP, direct quenching, and quenching & tempering

On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 690

Corrosion of New Zirconium Claddings in 500 °C/10.3 MPa Steam: Effects of Alloying and Metallography

Threshold stress intensity of hydrogen-induced cracking and stress corrosion cracking of high strength steel

The cracking growth behavior of a sensitized Alloy 800H in supercritical water

Stress Corrosion Cracking of Copper–Nickel Alloys: A Review

SCC susceptibility of RRA treated high-zinc 7068 aluminum alloy

Stress corrosion crack initiation in Alloy 690 in high temperature water

New insights into the stress rupture life enhancement mechanisms of a nickel-based superalloy

The single effect of microstructure, residual strain and geometric structure on the stress corrosion cracking behavior of scratched alloy 690TT