Abstract:The ancient white bricks in the Yichun region occupy a special place in Chinese cultural heritage. In order to study the material properties of these unique bricks, a series of experimental studies were conducted, including measurement of density, compressive strength, thermal conductivity, chemical composition, phase composition, pore structure, micro morphology, and firing temperature. These material properties were tested and analyzed using a variety of methods including X-ray fluorescence (XRF) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury injection test, thermal expansion test, etc. The material properties of the ancient white bricks were also compared with the material properties of the traditional red bricks and of the traditional blue bricks. The results reveal that while the thermal conductivity of the ancient white bricks is lower than that of the traditional red bricks and of the traditional blue bricks, the ancient white bricks’ density is actually slightly higher than that of the traditional red bricks and of the traditional blue bricks. An additional finding is that whereas the compressive strength of the white bricks from the ancient city walls is higher than that of the traditional red bricks and of the traditional blue bricks, the compressive strength of the white bricks from the traditional residential walls is similar to that of the traditional red bricks and of the traditional blue bricks. The main components of these two types of ancient white bricks are basically consistent with the constituents of the natural clay originating in the Yichun region, such as Al-Mg compounds and silicide, furthermore the proportion of each of these main elements is also similar. The phases of these two types of ancient white bricks are mainly composed of γ-Fe2O3, FeCO3, FeS, enstatite, gaylussite, talc, calcite, quartz, and corundum. The pore size of the two types of ancient white bricks is mainly concentrated in the interval between 0.1 μm and 1 μm, which is similar to the traditional blue bricks’, but is smaller than the traditional red bricks’. The firing temperature of the white bricks from the ancient city walls is between 650°C and 700°C, and the firing temperature of the white bricks from the traditional residential walls is approximately 600°C. These results can provide the basis for the excavation of traditional techniques and a scientific conservation strategy for the ancient Chinese white bricks.

Study on the mechanical behavior of millennium-ancient bricks based on microscopic characteristics

Analysis of Chinese ancient brick masonry characteristics under uniaxial compression fatigue loading

Experimental Study on Mechanical Properties of Basalt Fiber-Clay Lime Mortar and Application in Brick Masonry

Chemical And Microscopic Study Of Masonry Mortar In Ancient Pagodas In East China

EVALUATION OF THE ORGANOSILICON MATERIALS FOR ANCIENT GREY BRICKS PRESERVATION

Mechanical Characterization of Historical Masonry by Core Drilling and Testing of Cylindrical Samples

Investigating the mechanical characteristics of unreinforced and reinforced stone masonry using an experimental database

Clustering evaluation of internal structural defects in ancient and replica antique green bricks based on ultrasonic detection

Crack Evolvement of Ancient Brick Masonry Under Uniaxial Compression Fatigue Loading

Micromechanics-Based Simulations of Compressive and Tensile Testing on Lime-Based Mortars

Seismic Behavior of Brick Masonry Walls Representative of Ancient Chinese Pagoda Walls Subjected to In-plane Cyclic Loading

Effect of eccentricity on retrofitting efficiency of basalt textile reinforced concrete on partially damaged masonry columns

Micro-mechanical properties of Song Dynasty tilestones based on nanoindentation tests and homogenization approach

Experimental Research on Material Properties of Ancient White Bricks in the Yichun Region, China

An Experimental Investigation of Mechanical Properties in Clay Brick Masonry by Partial Replacement of Fine Aggregate with Clay Brick Waste

Relationship between Cracks and Lateral Deformation of Ancient Platform's Brick Masonry and its Mechanical Property

Finite element analysis of masonry structure based on micro-model

Strain Monitoring and Crack Detection in Masonry Walls under In-Plane Shear Loading Using Smart Bricks: First Results from Experimental Tests and Numerical Simulations

About the Use of Concrete Damage Plasticity for Modeling Masonry Post-Elastic Behavior

Investigation of the properties and behaviour of ancient and newly constructed mudbricks from the ancient walls of Eleusis

A macro modelling continuum approach with embedded discontinuities for the assessment of masonry arch bridges under earthquake loading