Abstract:The ancient white bricks in the Yichun region occupy a special place in Chinese cultural heritage. In order to study the material properties of these unique bricks, a series of experimental studies were conducted, including measurement of density, compressive strength, thermal conductivity, chemical composition, phase composition, pore structure, micro morphology, and firing temperature. These material properties were tested and analyzed using a variety of methods including X-ray fluorescence (XRF) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM), mercury injection test, thermal expansion test, etc. The material properties of the ancient white bricks were also compared with the material properties of the traditional red bricks and of the traditional blue bricks. The results reveal that while the thermal conductivity of the ancient white bricks is lower than that of the traditional red bricks and of the traditional blue bricks, the ancient white bricks’ density is actually slightly higher than that of the traditional red bricks and of the traditional blue bricks. An additional finding is that whereas the compressive strength of the white bricks from the ancient city walls is higher than that of the traditional red bricks and of the traditional blue bricks, the compressive strength of the white bricks from the traditional residential walls is similar to that of the traditional red bricks and of the traditional blue bricks. The main components of these two types of ancient white bricks are basically consistent with the constituents of the natural clay originating in the Yichun region, such as Al-Mg compounds and silicide, furthermore the proportion of each of these main elements is also similar. The phases of these two types of ancient white bricks are mainly composed of γ-Fe2O3, FeCO3, FeS, enstatite, gaylussite, talc, calcite, quartz, and corundum. The pore size of the two types of ancient white bricks is mainly concentrated in the interval between 0.1 μm and 1 μm, which is similar to the traditional blue bricks’, but is smaller than the traditional red bricks’. The firing temperature of the white bricks from the ancient city walls is between 650°C and 700°C, and the firing temperature of the white bricks from the traditional residential walls is approximately 600°C. These results can provide the basis for the excavation of traditional techniques and a scientific conservation strategy for the ancient Chinese white bricks.

Clustering evaluation of internal structural defects in ancient and replica antique green bricks based on ultrasonic detection

EVALUATION OF THE ORGANOSILICON MATERIALS FOR ANCIENT GREY BRICKS PRESERVATION

Study on the mechanical behavior of millennium-ancient bricks based on microscopic characteristics

Chemical And Microscopic Study Of Masonry Mortar In Ancient Pagodas In East China

Analysis of Chinese ancient brick masonry characteristics under uniaxial compression fatigue loading

Evaluation of deterioration degree and consolidation effectiveness in sandstone and clay brick materials based on the micro-drilling resistance method

Investigating the mechanical characteristics of unreinforced and reinforced stone masonry using an experimental database

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Material characterization of the brick in the Ming Dynasty heritage wall of Pianguan County: A case study

Study on the Characterization of Differential Weathering Feature Based on Surface Roughness Theory and 3D Laser Scanning: A Case Study of the Suoyang Ancient City

Investigation and Analysis of Ancient Brick Carvings of the Liuhe Pagoda in Hangzhou

Seismic Behavior of Brick Masonry Walls Representative of Ancient Chinese Pagoda Walls Subjected to In-plane Cyclic Loading

Recognition of Damage Types of Chinese Gray-Brick Ancient Buildings Based on Machine Learning—Taking the Macau World Heritage Buffer Zone as an Example

Non-destructive testing research on the surface damage faced by the Shanhaiguan Great Wall based on machine learning

Safety Evaluation of an Ancient Masonry Seawall Structure with Modified DDA Method

Experimental Research on Material Properties of Ancient White Bricks in the Yichun Region, China

Strength Characteristics, Ultrasonic Wave Velocity, and theCorrelation between Them in Clay Bricks under Dry and Saturated Conditions

Predicting the Durability of Solid Fired Bricks Using NDT Electroacoustic Methods

Characterization on Flaking of Rammed Earthen Sites Using SMO Algorithm and Surface Topography Analysis: A Case Study of Jiaohe Ruins

Monitoring the Deterioration of Masonry Relics at a UNESCO World Heritage Site

Strain Monitoring and Crack Detection in Masonry Walls under In-Plane Shear Loading Using Smart Bricks: First Results from Experimental Tests and Numerical Simulations