Abstract:Bed joint reinforced repointing is a retrofitting technique for unreinforced masonry structures that is commonly applied in the Netherlands to repair settlement-induced damage. Using this technique, the bed joints of masonry walls are reinforced with steel rebars that are embedded in a high strength repair mortar. Due to the increase of induced seismic events in the northern part of the Netherlands, an experimental study was carried out at Delft University of Technology to investigate the performance of this retrofitting technique for combined settlement and seismic loading. This paper aims to simulate the experimental results, with a focus on the comparison of different finite element modelling approaches for studying both un-strengthened and strengthened full-scale tested walls. To that end, three different models are investigated – comprising both macro (continuum) and simplified and detailed micro (brick-to-brick) modelling approaches. The bricks and mortar joints are modelled as one homogenous continuum in the macro model, whereas in the two brick-to-brick models these structural components are modelled separately, with the detailed model including interface elements to simulate the brick–mortar bonds. Nonlinear pushover analyses are subsequently carried out using all three modelling approaches, for both monotonic and cyclic loading cases. Based on these analyses, the detailed brick-to-brick model was found unsuitable to simulate the strengthened wall because cracks in the model mainly occur in the form of opening of the brick–mortar bond interfaces, while smeared cracking in the plane stress elements of the mortar joints is very limited. Similarly, the continuum damage model was found to be inaccurate when pre-existing damage in the experiment needed to be taken into account. The continuum damage model also showed lower axial stresses in the rebars, compared with the simplified brick-to-brick model, as the former does not allow for the direct assignment of material properties for the high strength repair mortar in the strengthened joints.

Investigating the mechanical characteristics of unreinforced and reinforced stone masonry using an experimental database

Mechanical Characterization of Historical Masonry by Core Drilling and Testing of Cylindrical Samples

A Strategy for Material Characterisation of Multi-Wythe Masonry Infrastructure: Preliminary Study

A Brief Overview on Crack Patterns, Repair and Strengthening of Historical Masonry Structures

Comparative numerical study to simulate masonry with bed joint reinforced repointing

REINFORCEMENT EXPERIMENT AND SIMULATION ANALYSIS ON BRICK MASONRY OF HISTORICAL BUILDINGS

Diagonal shear behavior of historic walls strengthened with composite reinforced mortar (CRM)

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

Assessment, repair, and retrofitting of masonry structures: A comprehensive review

Seismic Performance of Brick Masonry Walls Strengthened with Engineered Cementitious Composites under Lateral Cyclic Loads

Predicting the compressive strength of unreinforced brick masonry using machine learning techniques validated on a case study of a museum through nondestructive testing

Experimental Study on Shear Strength of Mortar Joint of Dry-Laid Stone Masonry Walls

Study on the mechanical behavior of millennium-ancient bricks based on microscopic characteristics

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF STONE MASONRY JOINT UNDER SHEAR AND COMPRESSION LOADING

Experimental Investigation on Innovative Stress Sensors for Existing Masonry Structures Monitoring

Nonlinear Behavior of a Masonry Subassemblage Before and After Strengthening with Inorganic Matrix-Grid Composites

In-Plane Shear Behavior of Unreinforced Masonry Wall Strengthened with Bamboo Fiber Textile-Reinforced Geopolymer Mortar

Mesoscopic study on historic masonry

Enhanced Shear Performance of Nacre-Inspired Masonry Structure: Experiment and Theoretical Model

Evaluating the Role of Mortar Composition on the Cyclic Behavior of Unreinforced Masonry Shear Walls

Bond Tests on Clay Bricks and Natural Stone Masonry Externally Bonded with FRP