Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Liquefiable biomass-derived porous carbons and their applications in CO 2 capture and conversion

Liquefiable biomass-derived porous carbons and their applications in CO2 capture and conversion

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Comprehensive Analysis of Biochar-Based Co2 Capture

The Application of Biochar for CO2 Capture: Influence of Biochar Preparation and CO2 Capture Reactors.

Recent Advances and Challenges in Ionic Materials for Post-Combustion Carbon Capture

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Porous Organic Polymers For Post-Combustion Carbon Capture

Porous Polymers and Porous Carbons for CO2 Capture and VOC Removal

High-value utilization of lignin to prepare N,O-codoped porous carbon as a high-performance adsorbent for carbon dioxide capture

Porous liquids: a novel porous medium for efficient carbon dioxide capture

Biomass-derived functional carbon material for CO2 adsorption and electrochemical CO2 reduction reaction

Synthesis and characterization of three-dimensional interconnected large-pore mesoporous cellular lignin carbon materials and their potential for CO 2 capture

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Porous materials for capture and catalytic conversion of CO2 at low concentration

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO 2 Capture

Emerging porous materials for carbon dioxide adsorptive capture: progress and challenges

Amine functionalized lignin-based mesoporous cellular carbons for CO 2 capture

Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations