Abstract:Background: Neural stimulation is an important method used to activate or inhibit action potentials of the neuronal anatomical targets found in the brain, central nerve and peripheral nerve. The neural stimulator system produces biphasic pulses that deliver balanced charge into tissue from single or multichannel electrodes. The timing and amplitude of these biphasic pulses are precisely controlled by the neural stimulator software or imbedded algorithms. Amplitude mismatch between the anodic current and cathodic current of the biphasic pulse will cause permanently damage for the neural tissues. The main goal of our circuit and layout design is to implement a 16-channel biphasic current mode programmable neural stimulator with calibration to minimize the current mismatch caused by inherent complementary metal oxide semiconductor (CMOS) manufacturing processes. Methods: This paper presents a 16-channel constant current mode neural stimulator chip. Each channel consists of a 7-bit controllable current DAC used as sink and source current driver. To reduce the LSB quantization error and the current mismatch, an automatic calibration circuit and flow diagram is presented in this paper. There are two modes of operation of the stimulator chip-namely, stimulation mode and calibration mode. The chip also includes a digital interface used to control the stimulator parameters and calibration levels specific for each individual channel. Results: This stimulator Application Specific Integrated Circuit (ASIC) is designed and fabricated in a 0.18 μm High-Voltage CMOS technology that allows for ±20 V power supply. The full-scale stimulation current was designed to be at 1 mA per channel. The output current was shown to be constant throughout the timing cycles over a wide range of electrode load impedances. The calibration circuit was also designed to reduce the effect of CMOS process variation of the P-channel metal oxide semiconductor (PMOS) and N-channel metal oxide semiconductor (NMOS) devices that will result in charge delivery to have less than 0.13% error. Conclusions: A 16-channel integrated biphasic neural stimulator chip with calibration is presented in this paper. The stimulator circuit design was simulated and the chip layout was completed. The chip layout was verified using design rules check (DRC) and layout versus schematic (LVS) design check using computer aided design (CAD) software. The test results we presented show constant current stimulation with charge balance error within 0.13% least-significant-bit (LSB). This LSB error was consistent throughout a variety stimulation patterns and electrode load impedances.

An 8-Channel 9-V-Compliant Crosstalk-Free Bipolar Biphasic Current-Controlled Neural Stimulator in a Standard CMOS Technology

16-Channel biphasic current-mode programmable charge balanced neural stimulation

Design of a Biphasic Current-Matching Neural Stimulator

A 10-Bit 15 V-Compliant Bi-Phasic Current-Mode Vagus Nerve Stimulation Circuit in 180 Nm BCD Technology.

Biofeedback Neuromuscular Electrical Stimulation Front-End for Dysphagia Treatment.

A Robust 4-channel Micro-power Low-noise Neural Recording Amplifier for Hippocampal Cognitive Prosthesis

A Multi-Channel Stimulator With High-Resolution Time-to-Current Conversion for Vagal-Cardiac Neuromodulation

A 3-mV Precision Dual-Mode-Controlled Fast Charge Balancing for Implantable Biphasic Neural Stimulators

A bidirectional neural interface CMOS analog front-end IC with embedded isolation switch for implantable devices

A Novel Biphasic-Current-Pulse Calibration Technique for Electrical Neural Stimulation

A 0.042 mm^2 programmable biphasic stimulator for cochlear implants suitable for a large number of channels

An Integrated Implantable Stimulator That is Fail-Safe Without Off-Chip Blocking-Capacitors

A Low-Temperature Poly-Silicon Thin Film Transistor Pixel Circuit for Active-Matrix Simultaneous Neurostimulation

A Charge Balanced Neural Stimulator Silicon Chip for Human-Machine Interface

A Wirelessly Programmable Chip for Multi-Channel Neural Stimulation

Design of a Net-Zero Charge Neural Stimulator with Feedback Control.

An electrode-impedance-aware neurostimulator IC that achieves low-power consumption and fast charge balance

A low-power, 16-channel implantable neurostimulator

Design Of A Compact Wireless Multi-Channel High Area-Efficient Stimulator With Arbitrary Channel Configuration

A Trimodal Wireless Implantable Neural Interface System-on-Chip

A 15.7-V-Compliant 86% Peak Efficiency Current-Mode Stimulator With Dynamic Voltage Supply for Implantable Medical Devices