Abstract:Background: Neural stimulation is an important method used to activate or inhibit action potentials of the neuronal anatomical targets found in the brain, central nerve and peripheral nerve. The neural stimulator system produces biphasic pulses that deliver balanced charge into tissue from single or multichannel electrodes. The timing and amplitude of these biphasic pulses are precisely controlled by the neural stimulator software or imbedded algorithms. Amplitude mismatch between the anodic current and cathodic current of the biphasic pulse will cause permanently damage for the neural tissues. The main goal of our circuit and layout design is to implement a 16-channel biphasic current mode programmable neural stimulator with calibration to minimize the current mismatch caused by inherent complementary metal oxide semiconductor (CMOS) manufacturing processes. Methods: This paper presents a 16-channel constant current mode neural stimulator chip. Each channel consists of a 7-bit controllable current DAC used as sink and source current driver. To reduce the LSB quantization error and the current mismatch, an automatic calibration circuit and flow diagram is presented in this paper. There are two modes of operation of the stimulator chip-namely, stimulation mode and calibration mode. The chip also includes a digital interface used to control the stimulator parameters and calibration levels specific for each individual channel. Results: This stimulator Application Specific Integrated Circuit (ASIC) is designed and fabricated in a 0.18 μm High-Voltage CMOS technology that allows for ±20 V power supply. The full-scale stimulation current was designed to be at 1 mA per channel. The output current was shown to be constant throughout the timing cycles over a wide range of electrode load impedances. The calibration circuit was also designed to reduce the effect of CMOS process variation of the P-channel metal oxide semiconductor (PMOS) and N-channel metal oxide semiconductor (NMOS) devices that will result in charge delivery to have less than 0.13% error. Conclusions: A 16-channel integrated biphasic neural stimulator chip with calibration is presented in this paper. The stimulator circuit design was simulated and the chip layout was completed. The chip layout was verified using design rules check (DRC) and layout versus schematic (LVS) design check using computer aided design (CAD) software. The test results we presented show constant current stimulation with charge balance error within 0.13% least-significant-bit (LSB). This LSB error was consistent throughout a variety stimulation patterns and electrode load impedances.

A 10-Bit 15 V-Compliant Bi-Phasic Current-Mode Vagus Nerve Stimulation Circuit in 180 Nm BCD Technology.

Biofeedback Neuromuscular Electrical Stimulation Front-End for Dysphagia Treatment.

A Multi-Channel Stimulator With High-Resolution Time-to-Current Conversion for Vagal-Cardiac Neuromodulation

An 8-Channel 9-V-Compliant Crosstalk-Free Bipolar Biphasic Current-Controlled Neural Stimulator in a Standard CMOS Technology

A multi-channel stimulator with an active electrode array implant for vagal-cardiac neuromodulation studies

16-Channel biphasic current-mode programmable charge balanced neural stimulation

Design of Dual-Mode Stimulus Chip With Built-In High Voltage Generator for Biomedical Applications

A Reconfigurable 16-Channel Hv Stimulator Asic For Spinal Cord Stimulation Systems

A High-Voltage-Compliant 86% Peak Efficiency Current-Mode Stimulator with Dynamic Voltage Supply for Implantable Medical Devices

Microelectronics neural bridge IC with voltage stimulation.

System on Chip for Closed Loop Neuromodulation Based on Dual Mode Biosignals.

A 4-Channel Neural Stimulation IC Design with Charge Balancing and Multiple Current Output Modes

A 3-mV Precision Dual-Mode-Controlled Fast Charge Balancing for Implantable Biphasic Neural Stimulators

Pain Control on Demand Based on Pulsed Radio-Frequency Stimulation of the Dorsal Root Ganglion Using a Batteryless Implantable CMOS SoC

26.3 A Closed-Loop Neuromodulation Chipset with 2-Level Classification Achieving 1.5vpp CM Interference Tolerance, 35db Stimulation Artifact Rejection in 0.5ms and 97.8% Sensitivity Seizure Detection

A Power-Efficient Current-Mode Neural/Muscular Stimulator Design For Peripheral Nerve Prosthesis

Design of a Biphasic Current-Matching Neural Stimulator

An Inductively Powered CMOS Multichannel Bionic Neural Link for Peripheral Nerve Function Restoration

Development of Implantable Neuro-Stimulator Used for Brain and Nerve Stimulation

A Fully Integrated Stimulator with High Stimulation Voltage Compliance Using Dynamic Bulk Biasing Technique in a Bulk CMOS Technology

Vagus nerve stimulation using an endovascular electrode array