Abstract:Implantable neural stimulation is becoming increasingly popular for treating neurologically impaired patients, restoring neural functions which would otherwise be lost due to diseases or injuries. The charge balance of the stimulus pulses is of paramount importance for the long-term safety of the electrode-tissue interface. This paper presents a novel neurostimulator integrated circuit in which two novel charge balancing schemes are proposed. One is based on acquiring the access resistance part ( R S ) of the inter-electrode impedance. Thanks to its adaptive anodic phase, the R S -based charge balance circuit does not require an additional discharge phase, achieving faster charge balance than most existing stimulator ICs. The other scheme is based on acquiring the double-layer capacitance part ( C DL ) of the inter-electrode impedance and the entire charge balancing process (inc. monitoring, computation and compensation) is performed in the analog domain. This is in sharp contrast to the existing electrode-impedance-aware charge balancing schemes which require ADCs and compute the net charge in the digital domain. Hence the new impedance-aware charge-balancing scheme is faster and more power friendly. The impedance-aware stimulator ASIC has been implemented using X-FAB's 180-nm CMOS process. The post-layout simulation results suggest a good charge balance is achieved as the voltage deviation from the electrode offset voltage on the electrode after the charge compensation reduces to 2.64 mV and –1.39 mV under the R S -based and C DL -based charge balancing schemes, respectively. The additional power overhead due to the proposed C DL -based charge balancer circuit is 2.46 μW at a stimulation rate of 400 Hz.

A 15.7-V-Compliant 86% Peak Efficiency Current-Mode Stimulator With Dynamic Voltage Supply for Implantable Medical Devices

A High-Voltage-Compliant 86% Peak Efficiency Current-Mode Stimulator with Dynamic Voltage Supply for Implantable Medical Devices

A 95.3% Peak Efficiency 38mV overshoot and 5mV/A load regulation Hysteretic Boost Converter with Anti-Phase Emulate Current Control

A 750Ma,dual-Mode PWM/PFM Step-Down DC-DC Converter with High Efficiency

A High-Voltage, Energy-Efficient, 4-Electrode Output Stage for Implantable Neural Stimulator

An Energy-Efficient Implantable-Neural-Stimulator System with Wireless Charging and Dynamic Voltage Output.

A Fully Integrated Stimulator with High Stimulation Voltage Compliance Using Dynamic Bulk Biasing Technique in a Bulk CMOS Technology

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

An Energy-Efficient Wireless Power Receiver with One-Step Adiabatic-Bipolar-Supply Generating for Implantable Electrical Stimulation Applications

An Energy-Efficient, Adaptive Voltage Scaling Output Stage for Neural Stimulators Based on Sepic Converter

A Dual-Mode Neural Stimulator with Two-Step Charge Balancing Scheme for Fast Residual Voltage Compensation

A Power-Efficient Current-Mode Neural/Muscular Stimulator Design For Peripheral Nerve Prosthesis

An energy-efficient, adiabatic electrode stimulator with inductive energy recycling and feedback current regulation

A PMOS-based Programmable Stimulator with Adaptive Charge Pump for Cardiac Pacemakers

A 4-Channel Neural Stimulation IC Design with Charge Balancing and Exponential Current Output

Energy-Efficient Power Management Interface With Adaptive HV Multimode Stimulation for Power-Sensor Integrated Patch-Type Systems

A 4-Channel Neural Stimulation IC Design with Charge Balancing and Multiple Current Output Modes

A 3-mV Precision Dual-Mode-Controlled Fast Charge Balancing for Implantable Biphasic Neural Stimulators

Design of Dual-Mode Stimulus Chip With Built-In High Voltage Generator for Biomedical Applications

An electrode-impedance-aware neurostimulator IC that achieves low-power consumption and fast charge balance

A Multi-Channel Stimulator With High-Resolution Time-to-Current Conversion for Vagal-Cardiac Neuromodulation