Abstract:Background: Neural stimulation is an important method used to activate or inhibit action potentials of the neuronal anatomical targets found in the brain, central nerve and peripheral nerve. The neural stimulator system produces biphasic pulses that deliver balanced charge into tissue from single or multichannel electrodes. The timing and amplitude of these biphasic pulses are precisely controlled by the neural stimulator software or imbedded algorithms. Amplitude mismatch between the anodic current and cathodic current of the biphasic pulse will cause permanently damage for the neural tissues. The main goal of our circuit and layout design is to implement a 16-channel biphasic current mode programmable neural stimulator with calibration to minimize the current mismatch caused by inherent complementary metal oxide semiconductor (CMOS) manufacturing processes. Methods: This paper presents a 16-channel constant current mode neural stimulator chip. Each channel consists of a 7-bit controllable current DAC used as sink and source current driver. To reduce the LSB quantization error and the current mismatch, an automatic calibration circuit and flow diagram is presented in this paper. There are two modes of operation of the stimulator chip-namely, stimulation mode and calibration mode. The chip also includes a digital interface used to control the stimulator parameters and calibration levels specific for each individual channel. Results: This stimulator Application Specific Integrated Circuit (ASIC) is designed and fabricated in a 0.18 μm High-Voltage CMOS technology that allows for ±20 V power supply. The full-scale stimulation current was designed to be at 1 mA per channel. The output current was shown to be constant throughout the timing cycles over a wide range of electrode load impedances. The calibration circuit was also designed to reduce the effect of CMOS process variation of the P-channel metal oxide semiconductor (PMOS) and N-channel metal oxide semiconductor (NMOS) devices that will result in charge delivery to have less than 0.13% error. Conclusions: A 16-channel integrated biphasic neural stimulator chip with calibration is presented in this paper. The stimulator circuit design was simulated and the chip layout was completed. The chip layout was verified using design rules check (DRC) and layout versus schematic (LVS) design check using computer aided design (CAD) software. The test results we presented show constant current stimulation with charge balance error within 0.13% least-significant-bit (LSB). This LSB error was consistent throughout a variety stimulation patterns and electrode load impedances.

A low-power, 16-channel implantable neurostimulator

A Wirelessly Programmable Chip for Multi-Channel Neural Stimulation

A Robust 4-channel Micro-power Low-noise Neural Recording Amplifier for Hippocampal Cognitive Prosthesis

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

Design Of A Compact Wireless Multi-Channel High Area-Efficient Stimulator With Arbitrary Channel Configuration

A Programmable and Implantable Neuro-stimulator

An Energy-Efficient Implantable-Neural-Stimulator System with Wireless Charging and Dynamic Voltage Output.

A 16-Channel Low-Power Neural Connectivity Extraction and Phase-Locked Deep Brain Stimulation SoC

A High-Voltage, Energy-Efficient, 4-Electrode Output Stage for Implantable Neural Stimulator

A wireless stimulator system-on-chip with an optically writable ID for addressable cortical microimplants

Multimodal Wireless-Powered Flexible System for Closed-Loop Neuromodulation

An Integrated Implantable Stimulator That is Fail-Safe Without Off-Chip Blocking-Capacitors

A Trimodal Wireless Implantable Neural Interface System-on-Chip

16-Channel biphasic current-mode programmable charge balanced neural stimulation

A Versatile Hermetically Sealed Microelectronic Implant for Peripheral Nerve Stimulation Applications

An electrode-impedance-aware neurostimulator IC that achieves low-power consumption and fast charge balance

A Compact 16-Channel Neural Signal Recorder with Wireless Power and Data Transmission

Development of Implantable Neuro-Stimulator Used for Brain and Nerve Stimulation

A Multi-Channel Stimulator With High-Resolution Time-to-Current Conversion for Vagal-Cardiac Neuromodulation

Toward a fully integrated neurostimulator with inductive power recovery front-end

A 3 mm × 3 mm Fully Integrated Wireless Power Receiver and Neural Interface System-on-Chip