Abstract:In a previous paper, the present authors have demonstrated the effectiveness of leaching of molybdenum concentrate by electro-oxidation in alkaline and acidic NaCl solutions (Darjaa et al., 1999). This paper included discussion for oxidizer production in detail, and the mechanism of leaching reaction during the process, which can be explained by the 18 electron transfer reaction of molybdenite (MoS 2 ) with the oxidizers produced in-situ by electrolysis of NaCl aqueous solution. Further studies were made with respect to various process parameters for electro-oxidation such as pH, pulp density and temperature of the slurry, and the dissolution behavior of minor elements such as iron, copper, and rhenium (Darjaa et al., 2000). This work also studied solubilities of molybdenum in the leach solution at various temperatures and pH, and demonstrated feasibility of molybdenum recovery by hydrolysis of molybdenum species. By adjusting the pH of the leach solution, molybdenum oxides or hydroxides free from sulfur were successfully obtained from the solution containing large amount of sulfate ion. Rhenium present in the concentrate at a level of several tens of mass ppm was found to dissolve into the leach solution, and co-precipitate with the molybdenum compounds. Rhenium in the leach solutions, therefore, has to be recovered before precipitation of molybdenum, otherwise it is lost in the precipitate. In the past, electro-oxidation using a bipolar cell was applied for leaching molybdenite concentrate and ores at U. S. Bureau of Mines (Lindstrom and Scheiner, 1973; Scheiner et al., 1976, 1979) and also at Bhabha Atomic Research Center (Gupta, 1992). In these previous studies, Moebious type bipolar cell, in which electrode plates were vertically inserted into the free surface of the electrolyte, was employed and its effectiveness was demonstrated. In the present study, recovery of rhenium from the leach solution obtained by electro-oxidation of molybdenum concentrate was examined using a vertically piled stack type cell. Laboratory scale apparatus using a single electrolytic cell is useful for understanding chemical reactions. However, it is not suitable for monitoring the behavior of trace rhenium contained in the concentrate at ppm level. A bipolar elecro-oxidation cell was newly constructed in this study with the purpose of increasing reaction rate of leaching of concentrate.

Electrochemical processing of rhenium-containing tungsten alloys waste in ammonia-carbonate solutions

Improved Electrodialysis Synthesis of Perrhenic Acid from the Electrolytes of Processing the Wastes of Tungsten–Rhenium Alloys

Processing of Tungsten-Containing Tool Using Electrolytic Method

Rhenium recovery from highly concentrated sulfuric media using AMR anionite in column mode

From waste to wealth: Valuable metals recovered from waste tungsten leaching residue by a smelting reduction process using CaO-Fe capture agent

PECULIARITIES OF ELECTRODEPOSITION OF COBALT—WOLFRAM—RENIUM ALLOY

Rhenium extraction from dilute solution by precipitation flotation and oxidative volatilization techniques

Simultaneously Recovery of Thorium and Tungsten through Hybrid Electrolysis–Nanofiltration Processes

Integrated Electrochemical Treatment Process for Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), Hexavalent Chromium, and Ammonia Using Electroactive Membranes

Hydrometallurgical Recovery of Rare Earth Elements from Mine Tailings and WEEE

Electrolytic production and characterization of nickel–rhenium alloy coatings

Ultrasound-assisted electrodialytic separation of cobalt from tungsten carbide scrap powder

A novel strategy for recovery of heavy metals and synthesis of Co-rich alloy from the alkali-treated tungsten residue using photovoltaic silicon kerf waste

Valorisation of alkali from tungsten leaching solution using diffusion dialysis and selective electrodialysis for anion-exchange membrane water electrolysis

Physicochemical and environmental characteristics of alkali leaching residue of wolframite and process for valuable metals recovery

A Porous Tungsten Substrate for Catalytic Reduction of Hydrogen by Dealloying of a Tungsten–Rhenium Alloy in an Aqueous Solution of Hydrochloric Acid

Electro-Oxidation of Molybdenum Concentrate Using Bipolar Cell, and Recovery of Rhenium.

Electrochemical processing of the active mass of spent manganese-zinc chemical current sources

Electrochemical Behaviour of Nickel(II)-Rhenium(VII) And Electrodeposition Of Nickel-Rhenium Alloy From Choline Chloride - Urea Deep Eutectic Solvent

Development of a Method for Reprocessing Technogenic Lead Production Raw Materials to Extract Rhenium and Arsenic

Rare earth elements from waste