Abstract:Super-hot acid leach residue is generated during zinc production in the roasting–leaching–electrowinning route, where both primary and secondary resources are used as feed material. This residue may contain valuable metals, such as lead, zinc, and iron, as well as precious metals, such as gold and silver. Four materials, namely super-hot acid leach residue, a residue formed when super-hot acid leach residue is selectively leached for lead with triethylenetetramine, as well as flotation concentrate, and flotation tailings formed in a selective silver flotation process with super-hot acid leach residue as the feed material were characterized to obtain a deeper understanding of possible further metal extraction. These four materials were characterized for chemical composition, mineralogy, and mineral distribution via chemical analyses, X-ray diffraction, and energy-dispersive scanning electron microscopy, respectively. The scanning electron microscope images showed that the materials have large variations in particle size distribution and composition. The results showed that the main lead phase in super-hot acid leach residue is lead sulfate, whereas it is mostly converted to lead sulfide during the selective lead leaching of the super-hot acid leach residue. The remaining lead sulfate is found in a solid solution with barium sulfate. Extracting lead from super-hot acid leach residue via triethylenetetramine leaching resulted in increased concentrations of gold and silver by 41% and 42%, respectively. The identified silver phases in super-hot acid leach residue may correspond to silver sulfide, silver chloride, and elementary silver, where silver sulfide was the most commonly occurring silver phase. After leaching this selectively for lead with triethylenetetramine, similar silver phases were identified, but silver sulfide and silver chloride occurred to a similar extent. Additionally, silver copper sulfide was detected. The presence of different silver phases might pose a challenge to reaching high silver recovery during leaching as the optimum leaching conditions differ somewhat. Furthermore, elemental sulfur, with a tendency to coat gold and silver particle surfaces, which is indicated to be present in all materials except the silver flotation tailings, may hinder metal extraction.

Physicochemical and environmental characteristics of alkali leaching residue of wolframite and process for valuable metals recovery

Study on harmless treatment and valuable elements recovery of neutralization residue from acid wastewater of copper mine

From waste to wealth: Valuable metals recovered from waste tungsten leaching residue by a smelting reduction process using CaO-Fe capture agent

Transforming Mining Waste to Wealth: A Novel Process for the Sustainable Recovery and Utilization of Iron Tailings through HCl Leaching and MOFs Absorption

A novel strategy for recovery of heavy metals and synthesis of Co-rich alloy from the alkali-treated tungsten residue using photovoltaic silicon kerf waste

Simulation and Experimental Investigation on One-Step Process for Recovery of Valuable Metals and Preparation of Clean Mineral Wool from Red Mud

Quantitative characterization of secondary copper flue dust and guidance for separating valuable and toxic elements via low-temperature roasting and selective leaching

Leaching of heavy metals from tungsten mining tailings: A case study based on static and kinetic leaching tests

Leaching characteristics and solidification strategy of heavy metals in solid waste from natural graphite purification

Eco-friendly extraction of arsenic and tungsten from hazardous tungsten residue waste by pressure oxidation leaching in alkaline solutions: Mechanism and kinetic model.

Valuable metals substance flow analysis in high-pressure acid leaching process of laterites

Removal of arsenic from “Dirty acid” wastewater via Waelz slag and the recovery of valuable metals

The Characterization of Residues Related to the Roasting– Leaching–Electrowinning Zinc Production Route for Further Metal Extraction

A Review of the Comprehensive Recovery of Valuable Elements from Copper Smelting Open-Circuit Dust and Arsenic Treatment

Elements characteristics and potential environmental risk assessment of jarosite residue and arsenic sulfide residue based on geochemical and mineralogical analysis

Process and Mechanism Investigation on Comprehensive Utilization of Arsenic-Alkali Residue

Effective disposal of hazardous waste from non-ferrous waste recycling through thermal treatment

Rare earth element recovery and aluminum-rich residue production from high alumina fly ash by alkali pre-desilication enhance the mechanochemical extraction process

Leaching Process of Rare Earth Elements, Gallium and Niobium in a Coal-Bearing Strata-Hosted Rare Metal Deposit—A Case Study from the Late Permian Tuff in the Zhongliangshan Mine, Chongqing

Synergistic utilization of industrial solid wastes: Extraction of valuable metals from tungsten leaching residue by photovoltaic sawing waste

Characteristics and chemical speciation of waste copper slag