Abstract:Nd, Pr and Dy are critical raw materials as major components for rare earth permanent magnets (REPM). These are integral for several components placed for example within electric vehicles and wind turbine generators. REE primary production is mainly realized in China (~80%) and no REPM recycling industry has been established. Hydrometallurgical recycling routes lead to iron dissolution (66 wt. % Fe in REPM), while pyrometallurgical approaches that utilize SiO2 risk contaminating the produced iron phase. A two-step process is presented that (i) creates an FeOx-CaO-Al2O3-REE2O3 molten slag at 1500 °C through oxidative smelting and (ii) separates an iron-depleted slag phase (CaO-Al2O3-REE2O3) and a molten iron phase via carbothermic or metallothermic reduction at 1700–2000 °C. The slag has been designed as a selective collector phase and the REE2O3 loading within the bulk slag can reach up 25 wt. % REE2O3 at 1700 °C. The contained minerals within the slag exhibit >40 wt. % REE (a higher REE concentration than in the initial REPM). The resulting phases are characterized via ICP-OES, CS and SEM-EDX. In addition, the first results with regard to the downstream hydrometallurgical processing of the CaO-Al2O3-REE2O3 slag are presented aiming at the recovery of REE2O3, as well as of CaO and Al2O3. The latter compounds are to be reused during the first process step, i.e., the oxidative smelting of REPM. Slag leaching with methane sulfonic acid (MSA) and separation with alternative methods, such as solvent extraction, seems promising. Future work will include slag filtration with the aim to separate REE-rich solid phases (minerals) from the slag and also molten salt electrolysis of the produced REE2O3 oxides.

Development of a Method for Reprocessing Technogenic Lead Production Raw Materials to Extract Rhenium and Arsenic

Extraction of non-ferrous metals and arsenic from fine dusts of copper smelter production by combined technology

Pyrometallurgical Recovery of Valuable Metals from Flue Dusts of Copper Smelter Through Lead Alloy

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Selection of crud processing methods with complex extraction of osmium and other valuable components

Extraction of Pb, Cu, Zn and As from Fine Dust of Copper Smelting Industry via Leaching with Sulfuric Acid

Recovery of Valuable Materials with the RecoDust Process

Behavior of As, Pb, Cu, and Zn under conditions of reduction roasting of fine dust generated by a copper smelter with natural gas

Process flowsheet development for selective arsenic removal, lead and antimony recovery from lead softening slag

Recovery of Re from Re-Rich Arsenic Sulfide Slag by Oxidative Leaching: Thermodynamic and Kinetic Mechanism Studies

Rhenium extraction from dilute solution by precipitation flotation and oxidative volatilization techniques

Extraction of arsenic from fine dust of copper smelters by reduction roasting with natural gas

Probing Study on Separating Pb, Zn, and Fe from Lead Slag by Coal-based Direct Reduction

Chemical-Free Method for Recovery of Lead from Spent Lead Paste by Reductive Sulfation Technique from By-product Utilization

Development of a Process to Recycle NdFeB Permanent Magnets Based on the CaO-Al2O3-Nd2O3 Slag System

Iron extraction from dust from scrap metal smelting in electric arc furnaces by magnetic separation

Metals Recovery From Molybdenite Concentrate By Electrooxidation And Leaching

A Novel Process for Recovering Rare Earth from Weathered Black Earth

Basis for a new process for producing REE oxides from Dicranopteris linearis

Reduction Smelting of the Waelz Slag from Electric Arc Furnace Dust Processing: An Experimental Study

Kinetics study of heavy metal removal from the lead smelting slag by carbothermic reduction: Effect of phase transformation