Abstract:Ammonia (NH 3 ) is a primary form of reactive nitrogen (Nr) which is an essential nutrient for all lives on the earth. Over the past century, the anthropological N 2 -fixing process in the industry (i.e., the Haber-Bosch process) has contributed to a significant portion of NH 3 production, and has also led to the continued accumulation of Nr in our ecosystems that has caused alarming and profound damages to the ecosystems as well as human welfare, as the rate of Nr generation is not balanced by the natural nitrification-denitrification process for its elimination. For example, leakage of excessive nitrate (NO 3 − ) into the water bodies caused by overfertilization of crop fields and discharged streams from food processing facilities has led to the formation of "dead zones" in coastal areas created by eutrophication. Denitrification in nature is also accompanied by the considerable generation of nitrous oxide (N 2 O) which possesses century-long stability and a 300-time greater potential for greenhouse effect than CO 2 . Therefore, restoring the balance between the generation and elimination of Nr is a challenging but urgent task faced by our human beings today. Sustainable solutions to this human-induced matter have been actively pursued in recent years either by converting Nr to harmless N 2 (i.e., denitrification), or by enhancing the effective circulation and utilization of Nr in the cycle of the nitrogen element. For instance, the electrochemical reduction of nitrate (NO3RR) is a promising approach as it can eliminate Nr without the need for additional oxidant/reductant. Selective NO3RR toward N 2 is highly desirable but remains difficult to achieve due to the high activation barrier for linking two N atoms on typical catalyst surfaces, and thus the coexistence of competing pathways toward other N-containing products. Alternatively, if other forms of Nr in waste resources can be converted to NH 3 in an electrochemical device, this process will not only alleviate the environmental impacts of those Nr, but also simultaneously produce NH 3 that could substantially decrease the NH 3 demand from the Haber-Bosch process, reduce the use of fossil-derived H 2 in NH 3 production, and decelerate the accumulation of Nr. In this work, we seek to develop an electricity-driven process that can convert various forms of Nr in real waste resources into manageable NH 3 products. The key component is a membrane-free alkaline electrolyzer (MFAEL) which transforms Nr into NH 3 as the sole N-containing product. With the inexpensive and robust MFAEL system, we achieved an ampere-level partial current density towards NH 3 production. By properly choosing the conditions of NH 3 collection from MFAEL, continuous production of pure NH 3 -based chemicals can be realized without the need for additional separation procedures. Techno-economic analysis (TEA) suggests the potential economic feasibility of the waste-to-NH 3 process by coupling electrodialysis (ED) for Nr concentration and the MFAEL process for Nr conversion, offering an all-sustainable route for upcycling waste N into the highest-demanded N-based chemical product, so that the growing trend of Nr buildup can be largely decelerated and reversed.

Integrated Electrochemical Treatment Process for Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), Hexavalent Chromium, and Ammonia Using Electroactive Membranes

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Degradation of Dissolved RDX, NQ, and DNAN by Cathodic Processes in an Electrochemical Flow-Through Reactor

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Coremoval of Energetics and Oxyanions via the In Situ Coupling of Catalytic and Enzymatic Destructions: A Solution to Ammunition Wastewater Treatment

Stepwise Ammonium Enrichment Using Selective Battery Electrodes

Long-Term Robustness and Failure Mechanisms of Electrochemical Stripping for Wastewater Ammonia Recovery

Electrified Conversion of Contaminated Water to Value: Selective Conversion of Aqueous Nitrate to Ammonia in a Polymer Electrolyte Membrane Cell

Scaling up an Electrochemical Nitrogen Recovery Process from Lab Benchtop to Pilot Wastewater Plant

Ammonia Recovery from Manure Wastewater and Simultaneous Electrosynthesis and Wastewater Treatment Using Ion Selective Redox Material

Degradation of Hexahydro‐1,3,5‐trinitro‐1,3, 5‐triazine (RDX) by Anaerobic Mesophilic Granular Sludge from a UASB Reactor

Electrodialysis and Nitrate Reduction to Enable Distributed Ammonia Manufacturing from Wastewaters

(Industrial Electrochemistry and Electrochemical Engineering Division Student Achievement Award) Reactive Separations to Remediate and Valorize Nitrogen-Polluted Wastewaters

Americium Recovery from Highly Active PUREX Raffinate by Solvent Extraction: The EXAm Process. A Review of 10 Years of R&D

Evaluation of a sequential anaerobic-aerobic membrane bioreactor system for treatment of traditional and insensitive munitions constituents

Ammonium Recovery from Manure Wastewater and Simultaneous Electrosynthesis Using Ammonium-Ion Selective Redox Material

Electrodialysis and nitrate reduction (EDNR) to enable distributed ammonia manufacturing from wastewaters

Highly efficient Mn2+, Mg2+, and NH4+ recovery from electrolytic manganese residue via leaching, solvent extraction, coprecipitation, and atmospheric oxidation

Electrochemically Upcycling Waste Nitrogen into Ammonia in a Membrane-Free Alkaline Electrolyzer

Electrochemical Synthesis of Ammonia Using Proton and Hydroxide Exchange Membrane Cells