Abstract:In this paper, a unified equivalent circuitmodel which can simplify the design and analysis of a family of high-voltage (HV) generation architectures based on the series-parallel (LCC) resonant converter is proposed. First, four HV generation architectures are reviewed in terms of the modularization level of HV transformers and rectifiers. Next, the steady-state, unified equivalent resistor and capacitor (RC) model that can be easily embedded into the resonant tank to replace the complex HV transformers and rectifiers is derived. The generic model can be applied to the HV generators with different architectures, different voltage multiplier topologies, stage, and polarities number. Further analysis of the power factor of the resonant tank, the voltage gain of HV generators, and electrical stresses of power components is achieved with the derived equivalent circuit model. The analysis reveals the inherent circuit properties among HV generators with different configurations. Subsequently, a comprehensive design methodology considering the power factor, conduction angle, and quality factor is presented, which leads to low electrical stresses on the components and high efficiency. Furthermore, the parameter selection constraint based on the power factor, conduction angle, and quality factor is derived, which can ensure the effective design outputs. Finally, the proposed unified equivalent model and comprehensive design methodology are validated by the experimental results of a 250 V input, 20 kV output 500 W HV generator hardware prototype with distributed transformers and voltage multipliers.

A Four-Capacitor Model for Inter-Primary-Winding Capacitances Analysis in the Input-Series Transformer-Integration Converters

A Four-Capacitor Model for Interprimary-Winding Capacitances Analysis in the Input-Series Transformer-Integration Converters

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Investigation of the Integrated-Transformer Winding Architectures in the Input-Series Flyback Auxiliary Power Supply Considering the Stray Capacitances

Stray capacitances influences of various parallel primary windings in input-series transformer-integration flyback converters

A Multiwinding Coupling Model for the Forward Input-Series Transformer-Integration Converter

Steady-State Analysis of the Inductively Coupled Power Transfer System

Design and Analysis of Single-Stage Power Factor Correction Converter with a Feedback Winding

Detailed Study of A 5v/1v, Four Stage Switched Capacitor Converter Suitable for Integration

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

A Parallel Primary Windings Scheme for the Flyback Input-Series Transformer-Integration Converter

A Coupled 3D FEM-Distribute Circuit Model for Numerical Analysis of Small Time Scale Transients of an IGBT based Inverter

Comparative Analysis of Steady-State Models for a Switched Capacitor Converter

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Current Sharing Analysis and Evaluation of Parallel DC-Link Capacitors in Vehicle Motor Drive

Unified Equivalent Steady-State Circuit Model and Comprehensive Design of the LCC Resonant Converter for HV Generation Architectures

Broadband Equivalent Circuit Modeling for Medium Voltage High-Frequency Transformers with Multi-Shielding Structure

Study on Steady Voltage Distribution of Insulated Cylindrical Cascaded Test Transformer

An Input-Series Flyback Auxiliary Power Supply Scheme Based on Transformer-Integration for High-Input Voltage Applications

An Improved Coupled FE–Circuit Model for Turn-to-Turn Short-Circuit Faults Inside Converter Transformers

A Multi-conductor Distributed Capacitance Equivalent Model of Planar Transformer for GaN-based LLC Converter