Abstract:In electric vehicle inverter systems, the DC-link capacitor bank becomes a critical obstacle to high power density due to its large volume. DC-link capacitor bank commonly adopts a multi-core parallel structure. The challenges exist in the current sharing of parallel capacitor cores because of the imbalance of stray parameters in the busbars. A current sharing analysis method aiming at thermal stress for capacitor banks in high-power-density inverters based on the characteristic matrix is proposed in this paper. First, the design basis of DC-link capacitors is given theoretically. Then, the complex coupling impedance model between multiple ports on capacitor busbars is mathematically derived by the matrix method, revealing the current resonance phenomenon of parallel capacitor cores affected by stray parameters. Next, three capacitor banks are evaluated by the proposed current sharing model. The influence of capacitor core arrangement and terminal position on current sharing is explored, which can guide capacitor banks’ high-power-density structure and heat dissipation design. Finally, an experimental platform is built with customized capacitor samples. The experimental results are consistent with the analysis results of the model, verifying the proposed method.

Stray capacitances influences of various parallel primary windings in input-series transformer-integration flyback converters

A Parallel Primary Windings Scheme for the Flyback Input-Series Transformer-Integration Converter

Investigation of the Integrated-Transformer Winding Architectures in the Input-Series Flyback Auxiliary Power Supply Considering the Stray Capacitances

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

A Four-Capacitor Model for Inter-Primary-Winding Capacitances Analysis in the Input-Series Transformer-Integration Converters

A Four-Capacitor Model for Interprimary-Winding Capacitances Analysis in the Input-Series Transformer-Integration Converters

Design and Analysis of Single-Stage Power Factor Correction Converter with a Feedback Winding

Minimizing Primary Current Based on Asymmetric Parameter Design Method under Wide Load Range and Variable Coupling Condition in Inductive Power Transfer Systems

ANALYSIS OF FORWARD-FLYBACK CONVERTER EMPLOYING TWO SWITCHES AND TWO TRANSFORMERS

Steady-State Analysis of the Inductively Coupled Power Transfer System

A Multiwinding Coupling Model for the Forward Input-Series Transformer-Integration Converter

Current Sharing Analysis and Evaluation of Parallel DC-Link Capacitors in Vehicle Motor Drive

Study On Planar Busbar Regarding Stray Inductance Minimization And Oscillation Suppression For High Power Converter

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

Design and Analysis of an Interleaved Flyback–Forward Boost Converter with the Current Autobalance Characteristic

The Design of Auxiliary Power Supply with Wide Range and High Input Voltage

Design Guidelines for Y Capacitance Based on CM Noise Caused by Line Frequency Switch of Totem-Pole PFC

Performance analysis of isolated ZVT interleaved converter with winding-cross-coupled inductors and switched-capacitors

Design of an Integrated Transformer with Parallel Windings for a 30-kW LLC Resonant Converter

An Input-Series Flyback Auxiliary Power Supply Scheme Based on Transformer-Integration for High-Input Voltage Applications