Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

ANALYSIS OF A CAR BURST SHAKING WHILE THE CAR ENGINE IS RUNNING AT IDLE

Simulation of nonlinear vibration of automobile main reducer

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Simulation of a vehicle movement on a roadway with stochastic irregularities prescribed by the power spectral density

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

Research on Mechanism Diagnosis of an Idling Abnormal Noise of Automobile Engine

Modified HHT Method for Vehicle Vibration Analysis in Time Domain Utilisation

Analysis and experiment on abnormal vibration for power assembly of diesel engine

Probabilistic Analysis Of Environmental Vibrations Induced By High-Speed Trains

Analytical and Numerical Investigations of Mechanical Vibration in the Vertical Direction of a Human Body in a Driving Vehicle using Biomechanical Vibration Model

Vibration analysis of nonlinear powertrain model with randomly cracked teeth under acyclism operation

Idle shake vibration optimization of an engine mounting system through the practical application of transfer path analysis

Analysis of variations in diesel engine idle vibration

Study on the influence of sudden load at idle condition on vibration and vibration isolation performance of the engine mount system

Influence of mass unbalancing of three-cylinder engine on idle vibration based on powertrain model

Vibration transfer path analysis and path ranking for NVH optimization of a vehicle interior

Vibration Analysis of an Engine Cylinder Block

Track Irregularities Estimation Based on the Vibration of Car-Body

Engine Fault Detection Using Vibration Signal Reconstruction in the Crank-Angle Domain

Interior Noise Analysis of a Non-load Type Body SUV

Analysis of real-time energy losses of electric vehicle caused by non-stationary road irregularity