Abstract:Vibration shaker testing is a great tool of validating the vibration fatigue performance of automotive components & systems. However, the representative vibration schedule requires a pre-knowledge of the acceleration history for the test object, which usually is not available until the later development phase of a vehicle program when physical properties are available. Sometimes, a generic vibration schedule developed from the worst-case loading profiles are used with risk of lacking correlation with later full vehicle durability test such as Road Test Simulator (RTS) or Proving Ground (PG) road test due to the higher loading amplitude. This paper proposes a virtual accelerometer approach to collect acceleration responses of a component from a virtual vehicle model. First, a multiple body dynamic model will be produced for virtual load calculation over a series of digitalized virtual proving ground road profiles. These loads will be then applied on the virtual vehicle CAE model with all representative components & subsystems. Acceleration response for the system of interest is then extracted from modal transient dynamic analysis. Later, the acceleration history is converted to frequency domain, and the associated spectral damage calculation is conducted. The final vibration profile is developed based on the equivalent damage concept. The virtual acceleration acquisition and physical acceleration acquisition show good agreement in both time domain and frequency domain. The profile generated from virtual acceleration acquisition covers very well for the physical acceleration acquisition. Overall, virtual acceleration-based profile ensures the conservative shake test results for the example studied. Compared to the physical accelerometer, the virtual accelerometer can provide acceleration data economically and quickly in the early phase of the product development. The proposed approach will ensure the component shaker test is conducted using the meaningful and representative vibration load.

Modified HHT Method for Vehicle Vibration Analysis in Time Domain Utilisation

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Research on an Estimate Method of Torsional Vibration for Rotating Machinery Based on HHT Analysis

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Study on the Method of EMD-Based Vibration Signal Time-Frequency Analysis

Analysis of Bearing Vibration Characteristics Using Hilbert-Huang Transformation

The HHT-based Analysis of Rotor Running Across Critical Rotating

Analysis of Speed-Dependent Vibration Amplification in a Nonlinear Driveline System Using Hilbert Transform

Analytical and Numerical Investigations of Mechanical Vibration in the Vertical Direction of a Human Body in a Driving Vehicle using Biomechanical Vibration Model

Virtual Accelerometer Approach to Create Vibration Profile for Automotive Component Shake Test

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Time domain analysis of structures with hysteretic vibration suppression systems

Idle shake vibration optimization of an engine mounting system through the practical application of transfer path analysis

Simulation of a vehicle movement on a roadway with stochastic irregularities prescribed by the power spectral density

ANALYSIS OF A CAR BURST SHAKING WHILE THE CAR ENGINE IS RUNNING AT IDLE

Identify the Sources of Vibration and Noise on Cars Gearbox by Spectral Analysis

High Order Dynamic Mode Decomposition for Mechanical Vibrations and Modal Analysis

Application of Finite Element Based Simulation and Modal Testing Methods to Improve Vehicle Powertrain Idle Vibration

An analysis of vehicle engine vibration signals with digital order tracking approaches

Analysis of vibration amplification in a multi-staged clutch damper during engine start-up

Analysis of Engine Vibration and Design of an Applicable Diagnosing Approach