Abstract:This study introduces a composite buffer interlayer (CBI) featuring localized high‐concentration electrolytes (LHCE) in a flexible polymer scaffold. Its extended electrochemical window suits high‐voltage cathodes and Li anodes. An in situ formed LiF‐Li3N rich interface ensures uniform lithium deposition and prevents dendrite formation. Benefitting from those advantages, LHCE‐CBI enables high performance for high‐voltage and high‐loading solid‐state lithium metal batteries. Solid‐state batteries (SSBs) with high‐voltage cathodes and Li‐anodes offer promising energy density and safety for next‐generation batteries. However, poor contact and electrochemical instability of solid electrolyte interfaces hinder their long‐term performance. Traditional rigid solidification interlayers possess restricted capability to address these issues. Herein, a composite buffer interlayer (CBI) with localized high‐concentration electrolytes (LHCEs) in a flexible polymer scaffold, tackling contact and stability problems and ensuring a perfect interface is developed. The extended electrochemical window provides it with synergistic antioxidation and antireduction capabilities, making it compatible with high‐voltage cathodes and Li anodes, while an in situ formed LiF‐Li3N rich inorganic interface ensures uniform lithium deposition and prevents dendrite formation. This CBI enables lithium symmetric cells to achieve a super high critical current density of 7.2 mA cm−2. Most impressively, coupled with a high‐voltage LiNi0.83Co0.12Mn0.05O2 cathode (NCM83), the full cell achieves 94.1% capacity retention after 125 cycles (coulombic efficiency >99.8%) at a mass loading of 14.6 mg cm−2 and a high voltage of 4.45 V. Additionally, a pouch cell with 17.2 mg cm−2 NCM83 achieves an initial discharge capacity of 3.82 mAh cm−2 an superior cycling stability (75 cycles, 89% capacity retention), showcasing the practical potential of LHCE‐CBI enabled SSBs.

Sacrificial Additive C 60 -Assisted Catholyte Buffer Layer for Li 1+ x Al x Ti 2- x (PO 4 ) 3 -Based All-Solid-State High-Voltage Batteries

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> Cathode for Stable All-Solid-State Sulfide-Based Batteries

Stabilization of Li0.33La0.55TiO3 Solid Electrolyte Interphase Layer and Enhancement of Cycling Performance of LiNi0.5Co0.3Mn0.2O2 Battery Cathode with Buffer Layer

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Single-Crystal-Layered Ni-Rich Oxide Modified by Phosphate Coating Boosting Interfacial Stability of Li10 SnP2 S12 -Based All-Solid-State Li Batteries.

Surface Construction of a High-Ionic-Conductivity Buffering Layer on a LiNi0.6Co0.2Mn0.2O2 Cathode for Stable All-Solid-State Sulfide-Based Batteries

Layer-Structured Composite Solid-State Electrolyte with a Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 -Coated Separator for High-Voltage Lithium Metal Batteries by In Situ Polymerization

Magicking an oxyhalide interface for 4.8 V‐tolerant high‐nickel cathodes in all‐solid‐state lithium‐ion batteries

Improvement of the Interface between the Lithium Anode and a Garnet-Type Solid Electrolyte of Lithium Batteries Using an Aluminum-Nitride Layer

Synergistic Reduction and Oxidation Resistant Interface Modifier for High‐Voltage and High‐Loading Solid‐State Lithium Batteries

Promoted Stability and Reaction Kinetics in Ni-Rich Cathodes via Mechanical Fusing Multifunctional LiZr 2 (PO 4 ) 3 Nanocrystals for High Mass Loading All-Solid-State Lithium Batteries

A Layered Hybrid Oxide–Sulfide All-Solid-State Battery with Lithium Metal Anode

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

Air-stable Li2C6O6 and Li4C6O6 As High-Efficiency Lithium Compensation Additives in Cathode