Abstract:Textile wastewater contains many organic compounds and colors that affect aquatic life and human health when discharged into the environment. High coloration due to excess dyes entering the wastewater causes coloration to the receiving water stream, affects the photosynthesis process of aquatic species, and adversely affects the landscape. SnO2-based electrodes have been extensively used in electrochemical water treatment, but their low durability decreases the pollutant treatment ability. Therefore, it is necessary to add another stable oxide to improve the performance and stability of SnO2 electrodes. This study aims to fabricate Ti/SnO2-Nb2O5 electrodes for the textile wastewater treatment using the electrochemical oxidation method. Different molar ratios of SnO2:Nb2O5 coating were prepared using the sol-gel method and then coated on the Ti substrates for calcination in 60 min at 500 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer Emmett Teller (BET), and cyclic voltammetry (CV) were used to determine the surface and electrochemical properties of Ti/SnO2-Nb2O5 electrodes. The SEM images show that SnO2-Nb2O5 electrode surfaces have the appearance of typical cracking structures of mixed metal oxides electrodes. The XRD spectrum show the SnO2 peaks of facet (110), (101), (200), (301), (321) and Nb2O5 peaks of facet (001), (002), (100), (101), (102) on Ti substrates. Furthermore, the specific surface area of the Ti/SnO2-Nb2O5 electrode ranges from 37.354 m2/g (SnO2:Nb2O5 = 9:1) to 71.885 m2/g (SnO2:Nb2O5 = 1:9). The electrochemical properties of SnO2:Nb2O5 electrodes showed high oxygen, chlorine evolution potential and high organic pollutant degradation in textile wastewater with COD removal at 83 %, decolorization at 74 % and the generation of many free radicals such as HO•, H2O2, O3, Cl2. The results demonstrate that the Ti/SnO2-Nb2O5 electrode with the mole ratio of 3:7 is the best in textile wastewater treatment with the longest service life (39 h).

Use of nickel-electroplating wastewater to synthesize Ni-doped TiO2 and NiTiO3 coatings by plasma electrolytic oxidation to treat hexavalent chromium in real electroplating wastewater

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Dye wastewater treatment using self-made Nd doped Ti/SnO2-Sb electro-catalytic electrodes

Grave-to-cradle upcycling of Ni from electroplating wastewater to photothermal CO 2 catalysis

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Decomplexation of Ni(II)-citrate and recovery of nickel from chelated nickel containing electroplating wastewater by peroxymonosulfate with nickel

Electrochemical Ni-EDTA degradation and Ni removal from electroless plating wastewaters using an innovative Ni-doped PbO2 anode: Optimization and mechanism

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Approaches to Enhancing Cathodic Nickel Recovery from Ni-EDTA Containing Synthetic Wastewaters

Electrochemical reactor with rotating cylinder electrode for optimum electrochemical recovery of nickel from plating rinsing effluents

Highly efficient nickel recovery from industrial wastewater via synergistic electrodeposition and electrocatalytic oxidation technique

Electrochemical degradation of Ni-EDTA complexes in electroless plating wastewater using PbO2-Bi electrodes

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Electrocatalysis coupled super-stable mineralization for the efficient treatment of phosphorus containing plating wastewater

Synthesis and characterization of nickel cobaltite–supported film for hexavalent chromium photocatalytic reduction

Electrochemical Treatment of Landfill Leachate to Remove Chromium (VI) using Ni3N and NiO NPs anodes

Recovery of Nickel by Electrolytic Method from Electroplating Wastewater

Efficient One-Step Removal and Immobilization of Recalcitrant Cr(III) and Cr(VI) Fractions in Real Electroplating Wastewater Using Electrolysis with O2 Aeration

Fabrication of high performance Ti/SnO2-Nb2O5 electrodes for electrochemical textile wastewater treatment

Removal of nickel from chemical plating waste solution through precipitation and production of microsized nickel hydroxide particles