Abstract:An integrated approach to active flow control is proposed by finding both the drooping leading edge and the morphing trailing edge for flow management. This strategy aims to manage flow separation control by utilizing the synergistic effects of both control mechanisms, which we call the combined morphing leading edge and trailing edge (CoMpLETE) technique. This design is inspired by a bionic porpoise nose and the flap movements of the cetacean species. The motion of this mechanism achieves a continuous, wave-like, variable airfoil camber. The dynamic motion of the airfoil's upper and lower surface coordinates in response to unsteady conditions is achieved by combining the thickness-to-chord (t/c) distribution with the time-dependent camber line equation. A parameterization model was constructed to mimic the motion around the morphing airfoil at various deflection amplitudes at the stall angle of attack and morphing actuation start times. The mean properties and qualitative trends of the flow phenomena are captured by the transition SST (shear stress transport) model. The effectiveness of the dynamically morphing airfoil as a flow control approach is evaluated by obtaining flow field data, such as velocity streamlines, vorticity contours, and aerodynamic forces. Different cases are investigated for the CoMpLETE morphing airfoil, which evaluates the airfoil's parameters, such as its morphing location, deflection amplitude, and morphing starting time. The morphing airfoil's performance is analyzed to provide further insights into the dynamic lift and drag force variations at pre-defined deflection frequencies of 0.5 Hz, 1 Hz, and 2 Hz. The findings demonstrate that adjusting the airfoil camber reduces streamwise adverse pressure gradients, thus preventing significant flow separation. Although the trailing-edge deflection and its location along the chord influence the generation and separation of the leading-edge vortex (LEV), these results show that the combined effect of the morphing leading edge and trailing edge has the potential to mitigate flow separation. The morphing airfoil successfully contributes to the flow reattachment and significantly increases the maximum lift coefficient (cl,max)). This work also broadens its focus to investigate the aerodynamic effects of a dynamically morphing leading and trailing edge, which seamlessly transitions along the side edges. The aerodynamic performance analysis is investigated across varying morphing frequencies, amplitudes, and actuation times.

Numerical Study of the Effect of the Trailing-Edge Devices (Gurney Flap and Divergent Trailing-edge Flap) on the Aerodynamic Characteristics of an Airfoil in Transonic Flow for Drone Applications

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Analysis of the impact of trailing-edge wing flaps on the aerodynamic characteristics and performance of the Tecnam P-2008JC aircraft

Numerical Study of a Supercritical Airfoil/wing with Variable-Camber Technology

A numerical investigation into the effects of Reynolds number on the flow mechanism induced by a tubercled leading edge

Numerical Simulation of Gurney Flap On RAE-2822 Airfoil

Comparative Analysis of Improved Aerodynamic Performance: Computational Fluid Dynamics Study of the Trailing Edge Morphing Concept Parameters

Effect of Morphed Trailing Edge on the Acoustic and Flow Characteristics of National Advisory Committee for Aeronautics (NACA) 4418 Airfoil

Numerical study on technical and conceptual improvements to a civil aircraft trailing-edge flap using passive/active flow control

Numerical Studies of Reverse Flows Controlled by Undulating Leading Edge

Noise generation mechanisms of a micro-tube porous trailing edge

Numerical investigation of leading edge noise reduction on a rod-airfoil configuration using porous materials and serrations

Study on Trailing Edge Ramp of Supercritical Airfoil

Effects of Trailing Edge Thickness on NACA 4412 Airfoil Performance at Low Reynolds Numbers: A CFD Analysis

Numerical research on the turbulent drag reduction mechanism of a transverse groove structure on an airfoil blade

Effect of trailing edge shape on the separated flow characteristics around an airfoil at low Reynolds number: A numerical study

Aeroacoustic investigation of multi-directional wings aligned in tandem under wing-in-ground effect

Numerical Investigation of a Porous Trailing Edge by a Zonal RANS/LES Simulation

Analysis of the impact of trailing-edge wing flaps on the aerodynamic characteristics and performance of the Diamond DA-20 aircraft

Numerical Simulation of the Transient Flow around the Combined Morphing Leading-Edge and Trailing-Edge Airfoil

Numerical Studying the Dynamic Stall of Reverse Flow Past a Wing