Abstract:Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultrahigh-lift low-pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% pitch were investigated at a Reynolds number of 210,000. It was found that the flow distributions across the passage at the trailing edge planes were highly nonuniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: (1) the area with high base pressure region increases, which tends to reduce the downstream mixing loss; (2) the base pressure reduces, which tends to increase the loss; and (3) the flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% pitch to 2.8% pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-ω SST model and the k-ω SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% pitch and 2.9% pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions.

Effects of Trailing Edge Thickness on NACA 4412 Airfoil Performance at Low Reynolds Numbers: A CFD Analysis

The Effects Of Trailing Edge Thickness On The Losses Of Ultra-High Lift Lp Turbine Blades

The Effects of Trailing Edge Thickness on the Losses of Ultrahigh Lift Low Pressure Turbine Blades

Improvement of NACA6309 Airfoil with Passive Air-Flow Control by using Trailing Edge Flap

Effect of Morphed Trailing Edge on the Acoustic and Flow Characteristics of National Advisory Committee for Aeronautics (NACA) 4418 Airfoil

Numerical simulation of the effects of trailing edge thickness on aerodynamic performance of low pressure turbine

Effect of trailing edge shape on the separated flow characteristics around an airfoil at low Reynolds number: A numerical study

Effect of Trailing Edge and Span Morphing on the Performance of an Optimized NACA6409 Wing in Ground Effect

Numerical Investigation of Unsteady Aerodynamic Effects on Thick Flatback Airfoils

Theoretical effect of modifications to the upper surface of two NACA airfoils using smooth polynomial additional thickness distributions which emphasize leading edge profile and which vary linearly at the trailing edge

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Effect of Relative Camber on the Aerodynamic Performance Improvement of Asymmetrical Blunt Trailing-Edge Modification

Aerodynamic Study of Leading-Edge Protuberance to Improve the Performance of NACA 0009 Blade

Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number

Optimizing NACA Airfoil Thickness Function Parameters for Maximum Lift-to-Drag Ratio

Effects of deflected trailing edge on the aerodynamic performance of high-lift low pressure turbine cascades

Effects of thickness and camber on aerodynamic performance of flapping wings during forward flight

An investigation on the effect of second-order additional thickness distributions to the upper surface of an NACA 64 sub 1-212 airfoil

A numerical investigation into the effects of Reynolds number on the flow mechanism induced by a tubercled leading edge

Study on Trailing Edge Ramp of Supercritical Airfoil

Numerical Analysis of Leading-Edge Roughness Effects on the Aerodynamic Performance of a Thick Wind Turbine Airfoil