Abstract:Numerical investigation of the compressible flow past an 18% thick circular-arc aerofoil was carried out using detached-eddy simulation for a free-stream Mach numberM∞= 0.76 and a Reynolds numberRe= 1.1 × 107. Results have been validated carefully against experimental data. Various fundamental mechanisms dictating the intricate flow phenomena, including moving shock wave behaviours, turbulent boundary layer characteristics, kinematics of coherent structures and dynamical processes in flow evolution, have been studied systematically. A feedback model is developed to predict the self-sustained shock wave motions repeated alternately along the upper and lower surfaces of the aerofoil, which is a key issue associated with the complex flow phenomena. Based on the moving shock wave characteristics, three typical flow regimes are classified as attached boundary layer, moving shock wave/turbulent boundary layer interaction and intermittent boundary layer separation. The turbulent statistical quantities have been analysed in detail, and different behaviours are found in the three flow regimes. Some quantities, e.g. pressure-dilatation correlation and dilatational dissipation, have exhibited that the compressibility effect is enhanced because of the shock wave/boundary layer interaction. Further, the kinematics of coherent vortical structures and the dynamical processes in flow evolution are analysed. The speed of downstream-propagating pressure waves in the separated boundary layer is consistent with the convection speed of the coherent vortical structures. The multi-layer structures of the separated shear layer and the moving shock wave are reasonably captured using the instantaneous Lamb vector divergence and curl, and the underlying dynamical processes are clarified. In addition, the proper orthogonal decomposition analysis of the fluctuating pressure field illustrates that the dominated modes are associated with the moving shock waves and the separated shear layers in the trailing-edge region. The results obtained in this study provide physical insight into the understanding of the mechanisms relevant to this complex flow.

An investigation on the effect of second-order additional thickness distributions to the upper surface of an NACA 64 sub 1-212 airfoil

Theoretical effect of modifications to the upper surface of two NACA airfoils using smooth polynomial additional thickness distributions which emphasize leading edge profile and which vary linearly at the trailing edge

Effect of thickness, camber, and thickness distribution on airfoil characteristics at Mach numbers up to 1.0

Effects of Cambers of Corrugated Airfoils on Gliding Performance by Using Lattice Boltzmann Method

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Numerical Investigation of the Effect of Airfoil Thickness on Onset of Dynamic Stall

Numerical Investigation of Unsteady Aerodynamic Effects on Thick Flatback Airfoils

Effects of Trailing Edge Thickness on NACA 4412 Airfoil Performance at Low Reynolds Numbers: A CFD Analysis

Numerical and Experimental Investigation of a NACA 64A-110 Airfoil in Transonic Flow Regime

Numerical investigation of the eﬀect of airfoil thickness on onset of dynamic stall

Numerical Investigations into the Asymmetric Effects on the Aerodynamic Response of A Pitching Airfoil

Low-speed characteristics of four cambered, 10-percent-thick NACA airfoil sections

Numerical Investigation of the Compressible Flow Past an Aerofoil

Numerical Study of Large Amplitude, Nonsinusoidal Motion and Camber Effects on Pitching Airfoil Propulsion

Numerical simulation study of the fluid-structure coupling effects of Kármán vortex street on airfoil motion with varying thickness

Comparative Assessment on Unsteady Aerodynamics of Thin and Thick Airfoils Subjected to Pitching Motion

Numerical investigations of the fluid-structure interaction of a NACA0012 airfoil based on large-eddy simulations

Investigation on Performance Influence of Maximum Thickness Position on Vertical Axis Wind Turbine Airfoil

Maximum Thickness Location Selection of High Subsonic Axial Compressor Airfoils and Its Effect on Aerodynamic Performance

Wake Dynamics of Finite Aspect Ratio Wings. Part II: Computational Study

Computational Analysis of Propulsion Performance of Modified Pitching Motion Airfoils in Laminar Flow