Abstract:A lattice-Boltzmann method has been employed to study the aeroacoustics and aerodynamics of airfoils equipped with leading edge treatments, namely the porous leading edge and leading edge serrations. The present study aims to identify the differences in noise reduction mechanisms between the two treatments. Within the context of turbomachinery applications, the airfoils undergo aerodynamic excitation due to the impingement of turbulent wake shed by an upstream rod. Two airfoil profiles are considered: NACA 0012 and NACA 5406; the latter mimics geometrical features and aerodynamic loading distribution of the outlet-guide vane in a turbofan test rig. Simulations are carried out at a freestream Mach number of 0.22, corresponding to Reynolds number based on the rod diameter of 48 000. The serrations are designed to follow a sinusoidal planform shape, whereas the porous leading edge is based on a Ni-Cr-Al metal-foam with homogeneous and isotropic properties. It is found that the porous leading edge attenuates noise by dampening surface pressure fluctuations due to the reduced blockage effect compared to the solid one. Differently, the leading edge serrations promote destructive interference of noise sources along the span. When applied against turbulent inflow with tonal characteristic, such as that induced by the impingement of Kàrmàn vortex street in the rod wake, the latter is more effective. On the other hand, both treatments are found to produce similar broadband noise reduction. When comparing aerodynamic performances, it is found that under a lifting condition, cross-flow is present through the porous material which results in lift reduction and drag increase. A serrated porous leading edge is then proposed to combine the benefits of the two leading edge treatments. This results in optimal noise reduction performances and lower aerodynamic penalty with respect to the fully porous leading edge.

Noise generation mechanisms of a micro-tube porous trailing edge

The role of porous structure on airfoil turbulence interaction noise reduction

Noise Reduction Mechanisms of an Airfoil with Trailing Edge Serrations at Low Mach Number

Aerodynamic noise from rigid trailing edges with finite porous extensions

An Analysis on the Flow Field Structures and the Aerodynamic Noise of Airfoils with Serrated Trailing Edges Based on Embedded Large Eddy Flow Simulations

Airfoil trailing-edge noise source identification using large-eddy simulation and wavelet transform

Effect of Morphed Trailing Edge on the Acoustic and Flow Characteristics of National Advisory Committee for Aeronautics (NACA) 4418 Airfoil

On the Multiple Tones in Trailing Edge Noise of an Aerofoil at Low-to-moderate Reynolds Number Flows

Airfoil Self-Noise Reduction by Gradient Distributed Porous Trailing Edges

On the noise generated by a controlled-diffusion aerofoil at R e c = 1.5 × 10 5

Efficient prediction of broadband trailing edge noise and application to porous edge treatment

Utilization of Whale-inspired Leading-edge Tubercles for Airfoil Noise Reduction

Experimental evidence on tonal noise generation and its control in tip-leakage flows

Trailing-edge broadband noise prediction of an airfoil with boundary-layer tripping

Experimental investigation of porous materials for trailing-edge noise reduction

Trailing-edge far-field noise and noise source characterization in high inflow turbulence conditions

On Secondary Tones Arising in Trailing-Edge Noise at Moderate Reynolds Numbers

Numerical investigation of leading edge noise reduction on a rod-airfoil configuration using porous materials and serrations

Composite control of airfoil broadband noise based on the combination of porous material and serrated trailing edges

Numerical Investigation of a Porous Trailing Edge by a Zonal RANS/LES Simulation

High Accuracy Numerical Investigation of Trailing Edge Noise at Vortex Shedding Critical Angle of Attack