Abstract:A lattice-Boltzmann method has been employed to study the aeroacoustics and aerodynamics of airfoils equipped with leading edge treatments, namely the porous leading edge and leading edge serrations. The present study aims to identify the differences in noise reduction mechanisms between the two treatments. Within the context of turbomachinery applications, the airfoils undergo aerodynamic excitation due to the impingement of turbulent wake shed by an upstream rod. Two airfoil profiles are considered: NACA 0012 and NACA 5406; the latter mimics geometrical features and aerodynamic loading distribution of the outlet-guide vane in a turbofan test rig. Simulations are carried out at a freestream Mach number of 0.22, corresponding to Reynolds number based on the rod diameter of 48 000. The serrations are designed to follow a sinusoidal planform shape, whereas the porous leading edge is based on a Ni-Cr-Al metal-foam with homogeneous and isotropic properties. It is found that the porous leading edge attenuates noise by dampening surface pressure fluctuations due to the reduced blockage effect compared to the solid one. Differently, the leading edge serrations promote destructive interference of noise sources along the span. When applied against turbulent inflow with tonal characteristic, such as that induced by the impingement of Kàrmàn vortex street in the rod wake, the latter is more effective. On the other hand, both treatments are found to produce similar broadband noise reduction. When comparing aerodynamic performances, it is found that under a lifting condition, cross-flow is present through the porous material which results in lift reduction and drag increase. A serrated porous leading edge is then proposed to combine the benefits of the two leading edge treatments. This results in optimal noise reduction performances and lower aerodynamic penalty with respect to the fully porous leading edge.

Numerical Investigation of a Porous Trailing Edge by a Zonal RANS/LES Simulation

Les and Cdns Investigation of T106c Low Pressure Turbine

Large Eddy Simulation and CDNS Investigation of T106C Low-Pressure Turbine

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model

Efficient prediction of broadband trailing edge noise and application to porous edge treatment

Noise generation mechanisms of a micro-tube porous trailing edge

Large Eddy Simulation of Turbulent Flows Passage of Reversible Runner

Aerodynamic noise from rigid trailing edges with finite porous extensions

Large Eddy Simulations for 3D Turbine Blades Using a High Order Flux Reconstruction Method

Large-Eddy Simulation and RANS Analysis of the End-Wall Flow in a Linear Low-Pressure Turbine Cascade, Part I: Flow and Secondary Vorticity Fields Under Varying Inlet Condition

Experimental investigation of porous materials for trailing-edge noise reduction

Large eddy simulation of a low-pressure turbine cascade with turbulent end wall boundary layers

Numerical investigation of flows around an axisymmetric body of revolution by using Reynolds-stress model based hybrid Reynolds-averaged Navier–Stokes/large eddy simulation

New Insight on Large-Eddy Simulation of Flow Past a Circular Cylinder at Subcritical Reynolds Number 3900

Towards adaptive simulations of turbulent wings at high Reynolds numbers

Effect of trailing edge shape on the separated flow characteristics around an airfoil at low Reynolds number: A numerical study

Numerical investigation of leading edge noise reduction on a rod-airfoil configuration using porous materials and serrations

Trailing-edge broadband noise prediction of an airfoil with boundary-layer tripping

Transition-based Constrained Large-Eddy Simulation Method with Application to an Ultrahigh-Lift Low-Pressure Turbine Cascade Flow

Prediction of the Influence of the Inlet End-Wall Boundary Layer on the Secondary Flow of a Low Pressure Turbine Airfoil Using RANS and Large-Eddy Simulations

Characterization of pressure fluctuations within a controlled-diffusion blade boundary layer using the equilibrium wall-modelled LES