Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Enhancing electrochemical performance of solid-state Li-ion batteries with composite electrolytes of fibrous LLZTO and PVDF-HFP: The role of LLZTO fiber diameter

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Enhancing Li+ transport efficiency in solid-state Li-ion batteries with a ceramic-array-based composite electrolyte

High-Performance 3-D Fiber Network Composite Electrolyte Enabled with Li-Ion Conducting Nanofibers and Amorphous PEO-Based Cross-Linked Polymer for Ambient All-Solid-State Lithium-Metal Batteries

Building Cross-Phase Ion Transport Channels Between Ceramic and Polymer for Highly Conductive Composite Solid-State Electrolyte

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Achieving High Performance of Lithium Metal Batteries by Improving the Interfacial Compatibility between Organic and Inorganic Electrolytes Using a Lithium Single-Ion Polymer

Improving room-temperature electrochemical performance of solid-state lithium battery by using electrospun La2Zr2O7 fibers-filled composite solid electrolyte

Improving Ionic Conductivity with Bimodal-Sized Li7La3Zr2O12 Fillers for Composite Polymer Electrolytes.

Polymer/ceramic gel electrolyte with in-situ interface forming enhances the performance of lithium metal batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

An agglomeration-free and high ion conductive ceramic-in-polymer composite solid electrolyte modified by fluorocarbon surfactant for enhancing performance of all-solid-state lithium batteries

Garnet-rich Composite Solid Electrolytes for Dendrite-Free, High-Rate, Solid-State Lithium-Metal Batteries

Li0.35La0.55TiO3 Nanofibers Enhanced Poly(vinylidene Fluoride)-Based Composite Polymer Electrolytes for All-Solid-State Batteries.

Revealing the Role of Active Fillers in Li‐ion Conduction of Composite Solid Electrolytes

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Synergistic Enhancement Effects of LLZO Fibers and Interfacial Modification for Polymer Solid Electrolyte on the Ambient-Temperature Electrochemical Performances of Solid-State Battery

Interface Functionalization of Composite Electrolyte by Lix-CeO2 Layer on the Surface of Li6.4La3Zr1.4Ta0.6O12

Constructing Robust LiF‐Enriched Interfaces in High‐Voltage Solid‐State Lithium Batteries Utilizing Tailored Oriented Ceramic Fiber Electrolytes

Coral-like Li 7 La 3 Zr 2 O 12 -Filled PVDF-HFP/LiODFB Composite Electrolytes for Solid-State Batteries with Excellent Cycle Performance