Abstract:Solid polymer electrolytes play a vital role in improving the safety of lithium batteries. However, low ionic conductivity and poor mechanical property limit their further applications. Herein, we fabricated a composite solid electrolyte (CSE) based on a polymer (polyvinylidene fluoride-hexafluoro propylene, PVDF-HFP) and an inorganic filler of porous graphitic carbon nitride (PGCN) nanosheets with a high specific surface area. The porous structure facilitated good distribution of PGCN in the PVDF-HFP matrix and offered abundant PVDF-HFP/PGCN interfaces, which might be beneficial for the Li+ transport. The CSE showed high ionic conductivity (2.3 × 10–4 S/cm at 30 °C), excellent cycling performance, and outstanding physical and chemical properties. Moreover, the correlation of the ionic conductivities of the CSEs and the specific surface of the PGCN fillers was discussed, and the results revealed that the ionic conductivity of the CSE was increased with the increase in the specific surface of PGCN, indirectly demonstrating that the transport of the Li+ was mainly conducted on the interfaces between the polymer and the inorganic fillers.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c02226?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c02226</a>.Schematic illustration for the synthesis process; SEM image and optical picture; TEM image; N2 absorption and desorption isotherm and pore size distribution; XRD pattern; FT-IR spectrum; XPS data; EDS mapping; Impedance of PGCN; Nyquist data of PVDF-HFP/PGCN/LiFSI; LSV curve of PVDF-HFP/LiFSI; Morphologies and specific surface area of various PGCNs nanosheets; Optical image of LFP cathode; EIS spectra of LFP/Li battery after different cycles; Comparison of the electrochemical performance (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c02226/suppl_file/ae0c02226_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Polymer/ceramic gel electrolyte with in-situ interface forming enhances the performance of lithium metal batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

High-performance intercalated composite solid electrolytes for lithium metal battery

Achieving High Performance of Lithium Metal Batteries by Improving the Interfacial Compatibility between Organic and Inorganic Electrolytes Using a Lithium Single-Ion Polymer

Highly Ionic Conductive, Self-Healing, Li10GeP2S12-Filled Composite Solid Electrolytes Based on Reversibly Interlocked Macromolecule Networks for Lithium Metal Batteries with Improved Cycling Stability

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO<sub>2</sub> Nanoparticles for Lithium Metal Batteries

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

Composite Electrolytes Prepared by Improving the Interfacial Compatibility of Organic-Inorganic Electrolytes for Dendrite-Free, Long-Life All-Solid Lithium Metal Batteries.

A highly ionic transference number eutectogel hybrid electrolytes based on spontaneous coupling inhibitor for solid-state lithium metal batteries

Combining Organic Plastic Salts with a Bicontinuous Electrospun PVDF-HFP/Li7La3Zr2O12 Membrane: LiF-Rich Solid-Electrolyte Interphase Enabling Stable Solid-State Lithium Metal Batteries.

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

An in-situ generated composite solid-state electrolyte towards high-voltage lithium metal batteries

Surface Modification of Garnet Fillers with a Polymeric Sacrificial Agent Enables Compatible Interfaces of Composite Solid-State Electrolytes.

Rapid Ion Transport Induced by the Enhanced Interaction in Composite Polymer Electrolyte for All-Solid-State Lithium-Metal Batteries

Formation of Excellent Cathode/Electrolyte Interface with UV-Cured Polymer Electrolyte through In Situ Strategy

Surface modification of garnet fillers with polymeric sacrificial agent enables compatible interfaces of composite solid-state electrolytes

Single‐Ion Conductive Polymer‐Based Composite Electrolytes for High‐Performance Solid‐State Lithium Metal Batteries

In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode

An initiator-free and solvent-free in-situ self-catalyzed crosslinked polymer electrolyte for all-solid-state lithium-metal batteries

Silica-reinforced Functional Composite Polymer Electrolyte with High Electrochemical Compatibility for Solid-State Lithium Metal Battery

High performance of solid electrolyte endowed by SiO 2 cross-linking agent towards lithium metal battery