Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Revealing the Role of Active Fillers in Li‐ion Conduction of Composite Solid Electrolytes

The “filler effect”: A study of solid oxide fillers with β-Li3PS4 for lithium conducting electrolytes

Improving Ionic Conductivity with Bimodal-Sized Li7La3Zr2O12 Fillers for Composite Polymer Electrolytes.

Insights into the effects of different inorganic fillers on the electrochemical performances of polymer solid electrolytes

Revealing the Mechanisms of Lithium-Ion Transport and Conduction in Composite Solid Polymer Electrolytes

Filler‐Integrated Composite Polymer Electrolyte for Solid‐State Lithium Batteries

Ion-conductive vs. non-ion-conductive ceramic fillers in silane-linked polyethylene oxide-based composite polymer electrolytes with high room-temperature ionic conductivity

The Critical Role of Fillers in Composite Polymer Electrolytes for Lithium Battery

Ionic conductivity optimization of composite polymer electrolytes through filler particle chemical modification

Surface Positive-Charged Modification of Inorganic Fillers to Optimize Lithium Ion Conductive Pathways in Composite Polymer Electrolytes for Lithium-Metal Batteries

Enhancing electrochemical performance of solid-state Li-ion batteries with composite electrolytes of fibrous LLZTO and PVDF-HFP: The role of LLZTO fiber diameter

Polymer Composite Electrolytes Containing Ionically Active Mesoporous SiO2 Particles

Surface Modification of Garnet Fillers with a Polymeric Sacrificial Agent Enables Compatible Interfaces of Composite Solid-State Electrolytes.

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Surface Coordination of Garnet Fillers Improves the Organic–Inorganic Interfacial Compatibility of Composite Solid Electrolyte

Synergy of Inorganic Fillers in Composite Thermoplastic Polymer/Ionic Liquid/LiTFSI Electrolytes

Li+-Containing, Continuous Silica Nanofibers for High Li+ Conductivity in Composite Polymer Electrolyte

Interface Regulation Enabling Three-Dimensional Li1.3Al0.3Ti1.7(PO4)3-reinforced Composite Solid Electrolyte for High-Performance Lithium Batteries

Advanced Composite Solid Electrolytes for Lithium Batteries: Filler Dimensional Design and Ion Path Optimization

Enhancing Li+ transport efficiency in solid-state Li-ion batteries with a ceramic-array-based composite electrolyte

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries