Abstract:Purpose. The development and application of additive technologies, which have a high rate of material utilization and significant production flexibility in the case of single and small-scale production, are relevant for solving various types of engineering problems. The final mechanical, technological and operational characteristics of products obtained by additive technologies are affected by a large number of initial parameters that can be varied in order to obtain the necessary properties of the material. The purpose of this work is to study the influence of the parameters of shape formation by the method of selective laser melting, in particular the scanning plan, on the quality of the material and the productivity of production. The methods. To achieve the goal, studies of the microstructure of products obtained by different scanning plans were carried out using optical microscopy, during which the shape of a single track, as well as the structure of the material in different directions of the laser beam, were analyzed. Findings. The effect of particle size, the mechanism of formation of a metal product during selective laser melting is analyzed. The influence of the scanning plan on the porosity, strength, and productivity of manufacturing by the method of selective laser melting is shown. The correct choice of technological parameters, such as the power and speed of the laser beam, the thickness of the metal powder layer, the scanning step between two adjacent single tracks, ensures the minimization of the number and size of defects (pores, cracks, shells) in the product material. The originality. The process of metal powder melting in the process of shaping products by the method of selective laser melting is analyzed. The scheme of formation of a single track is obtained in the case of choosing different scanning schemes. A list of technological parameters, the variation of which affects the properties and quality of the product, has been formed. Practical implementation. The use of additive technologies for the molding of products in single and small-batch production allows to reduce the time of production preparation and reduce the amount of waste. When choosing technological parameters, one should understand their dependence on the final properties of the finished product, because the method of selective laser melting allows to obtain products of different porosity, strength and other properties.

Influence of parameters of molding by the selective laser melting method on product quality

Quality assurance thermophysical aspects of highly porous implants with cellular structure obtained by selective laser melting

Effect of Process Parameters on Residual Stresses, Distortions, and Porosity in Selective Laser Melting of Maraging Steel 300

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Effects of the processing parameters on the forming quality of stainless steel parts by Selective Laser Melting

Study of the Effect of Selective Laser Melting Parameters on the Structure and Physico-Mechanical Properties of a Blank Made of Stainless Chromium-Nickel Steel

Influence of Typical Technological Parameters on the Forming Quality of TA1 in Selective Laser Melting

Effect of Processing Parameters on the Densification of an Additively Manufactured 2024 Al Alloy

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

INVESTIGATION OF THE STRUCTURE AND PROPERTIES OF FERROUS NICKEL ALLOYS AFTER MOLDING BY SELECTIVE LASER MELTING

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Process parameters effect on porosity rate of AlSi10Mg parts additively manufactured by Selective Laser Melting: challenges and research opportunities

The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of Al6061 and AlSi10Mg Alloys

Study on the Technique During Selective Laser Melting of Stainless Steel Powder

Experimental and statistical investigation of mechanical properties and surface roughness in additive manufacturing with selective laser melting of AlSi10Mg alloy

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

Effect of Processing Parameters on Forming Defects During Selective Laser Melting of AlSi10Mg Powder

Optimization of Molten Metal Line Morphology in Selective Laser Melting

Study on the Effects of Powder Properties on the Performance of Stainless Steel Parts Produced by Selective Laser Melting

Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy

Study on the Influence of Additive Manufacturing Process Parameters on Internal-channel Part Geometrical Quality