Abstract:In metal-based additive manufacturing, laser power, scanning speed, hatching distance and layer thickness are important manufacturing parameters. These parameters are very important in terms of microstructure, mechanical properties and surface quality of the final product. For this reason, it is very important choosing these parameters correctly in the production process. One of the common approaches used to optimize these parameters is volumetric energy density. In this study, product quality improvement in additive manufacturing of AlSi10Mg alloy was focused, and test pieces were produced at different volumetric energy densities. The parts were manufactured according to the Taguchi L 9 orthogonal array experimental design. Three different laser powers (250–300–350 W), three different scanning speeds (900–1000–1100 mm/s), three different hatching distances (0.17–0.19–0.21 mm) and constant layer thickness values were used as manufacturing parameters. The performance properties of the manufactured parts were investigated in terms of mechanical properties and surface roughness. As a result of the study, it was observed that the mechanical properties of the samples produced at very high and very low volumetric energy densities decreased and the surface roughness increased. Maximum mechanical properties within the produced samples were obtained at 55.82 J/mm 3 volumetric energy density, and minimum surface roughness was obtained at 54.46 J/mm 3 volumetric energy density. For mechanical properties and surface roughness, multiple response optimization was performed with Taguchi-based Grey relational analysis method. According to the experimental results, optimum manufacturing parameters for additive manufacturing of AlSi10Mg alloy; it was obtained as 350 W laser power, 1100 mm/s scanning speed, 0.19 mm hatching distance and 55.82 J/mm 3 volumetric energy density, which is the interaction of these parameters. The mechanical properties and surface roughness obtained graphically were supported by fracture surface images and microstructure studies. With multiple response optimization, 30.15% improvement was achieved in performance indicators. In addition, it has been demonstrated that volumetric energy density can be used as an important evaluation tool in determining product quality.

Experimental and statistical investigation of mechanical properties and surface roughness in additive manufacturing with selective laser melting of AlSi10Mg alloy

Direct Metal Laser Sintering to Develop Complex Contours of Aisimg Aluminium Alloy - Build Parameters Optimization

An Investigation into the Influence of Processing Parameters on the Surface Quality of AlSi10Mg Parts by SLM Process

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

On the selective laser melting based additive manufacturing of AlSi10Mg: The process parameter investigation through multiphysics simulation and experimental validation

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Microstructure and mechanical properties of an additively manufactured AlSi10Mg based alloy

Effect of Processing Parameters on the Densification of an Additively Manufactured 2024 Al Alloy

Parameter optimization and microhardness experiment of AlSi10Mg alloy prepared by selective laser melting

Influence of Contour Scan Variation on Surface, Bulk and Mechanical Properties of LPBF-Processed AlSi7Mg0.6

Process Optimization and Mechanical Property Evolution of AlSiMg0.75 by Selective Laser Melting

Metallurgical Defects and Roughness Investigation in the Laser Powder Bed Fusion Multi-Scanning Strategy of AlSi10Mg Parts

Effect of Selective Laser Melting Process Parameters on the Quality of Al Alloy Parts: Powder Characterization, Density, Surface Roughness, and Dimensional Accuracy

Effects of process parameters on selective laser melting of Ti6Al4V-ELI alloy and parameter optimization via response surface method

Experimental Research on Selective Laser Melting AlSi10Mg Alloys: Process, Densification and Performance

Investigation for Macro Mechanical Behavior Explicitly for Thin-Walled Parts of AlSi10Mg Alloy Using Selective Laser Melting Technique

Selective Laser Melting Process Optimization and Mechanical Properties Evolution of AlSi10Mg by Determining Temperature of the Build Chamber using Arduino IDE and Coding Algorithm

An experimental investigation of the influence of SLM input factors on the as-built AlSi10Mg surface quality

Multi-objective Optimization in Selective Laser Melting of AlSi10Mg Alloy Based on Response Surface Methodology

Optimization of Processing Parameters and Establishment of a Relationship Between Microstructure and Mechanical Properties of SLM Titanium Alloy