Abstract:Currently, there are a number of additive technologies that are used in various industries (laser fusion of powder materials, electron beam melting, etc.). The formation of metal structures and products by methods of additive technologies occurs by adding a new layer of material and its further melting (sintering), ensuring the adhesion of each subsequent layer with the previous one in accordance with digital model data. The advantages of using and developing additive technologies include the possibility of using a wide range of materials, obtaining finished products with complex geometries, restoring and repairing damaged structures, as well as the possibility of applying protective and anticorrosive coatings. Metal powder materials with specified physical and mechanical properties are of crucial importance in additive manufacturing. The main requirements for such powders include requirements for their shape and size. The preferred particle shape is spherical, as it provides a more compact installation in a given volume and the necessary fluidity of the material, which is due to the low resistance in the supply systems of powder materials in 3D printers. The aim of the work is to study the influence of the parameters of the SLM printing process on the structure and mechanical properties of products made of 12Cr18Ni10Ti alloy. Samples obtained by selective laser melting were subjected to pycnometric and metallographic analysis. Based on the obtained microstructure images, a digital porosity analysis of the work piece under study was performed in the Thixomet Pro software package. The microhardness and acoustic characteristics were also measured over the entire section of the work piece under study. It was revealed that with an increase in the distance from the substrate (0...112 mm) in the transverse and longitudinal sections, the tendency remains to decrease the density values and increase the volume fraction of pores. It is shown that the acoustic parameter Dc can be used to control changes in the physical and mechanical properties of stainless chromium-nickel steel blanks obtained by selective laser melting.

The effect of selective laser melting process parameters and remelting scanning strategy on relative density and surface hardness of stainless steel 316L

Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting

Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel

Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

Effect of Process Parameters on Residual Stresses, Distortions, and Porosity in Selective Laser Melting of Maraging Steel 300

Selective Laser Melting and Mechanical Properties of Stainless Steels

Selective laser melting (SLM) of AISI 316L—impact of laser power, layer thickness, and hatch spacing on roughness, density, and microhardness at constant input energy density

Mechanical properties of 316L stainless steel samples fabricated by selective laser melting and comparison with other manufacturing methods

Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting

Effect of layer-by-layer laser remelting process on the microstructure and performance of selective laser melting 316L stainless steel

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Study of the Effect of Selective Laser Melting Parameters on the Structure and Physico-Mechanical Properties of a Blank Made of Stainless Chromium-Nickel Steel

Effect of laser scanning angle on shear slip behavior along melt track of selective laser melted 316L stainless steel during tensile failure

In-situ Monitoring and Defect Detection of Selective Laser Melting Process and Impact of Process Parameters on the Quality of Fabricated SS 316L

Mechanical behavior of selective laser melted 316L stainless steel

Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Effects of powders and process parameters on density and hardness of A357 aluminum alloy fabricated by selective laser melting

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Effects of laser scanning speed on the microstructure and mechanical properties of 2205 duplex stainless steel fabricated by selective laser melting

Selective Laser Melting of Stainless Steels: A review of Process, Microstructure and Properties