Abstract:In the implantation of porous bone scaffolds, good mechanical properties of the scaffold are a prerequisite for the long-term functionality of the implanted scaffolds, which varies according to the structure and the forming process. In this study, the influence of the forming parameters and structure of the Selective Laser Melting (SLM) process on the mechanical properties of 316L stainless steel bone scaffolds was investigated using finite element simulation combined with experimental methods. The mechanism of the influence of the process parameters and structure on the mechanical properties of bone scaffolds was summarized using static compression finite element numerical simulations, compression experiments, hydrodynamic simulations, forming numerical simulations and SLM forming experiments. The results show that the magnitude of residual stress and the distribution of defects under different process parameters had a strong influence on the microstructure and properties of the scaffold, and the residual stress of the Body-Centered Cube (BCC) structure formed at an energy density of 41.7 J/mm3 was significantly reduced, with less surface spheroidization and fewer cracks on the melt pool surface. The smallest grain size of 321 nm was obtained at an energy density of 77.4 J/mm3, while in terms of mechanical properties, the optimization of the structure resulted in an 8.3% increase in yield strength and a reduction in stress concentration. The predictions of stress, deformation, and forming quality during construction with different process parameters, achieved using finite element analysis, are basically in agreement with the experimental results, indicating that the best process parameters for forming BCC structural supports were determined by using finite element simulation combined with experiments; moreover, the distribution and evolution of residual stresses and defects under different process parameters for constructing BCC structures were obtained.

Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting

Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel

Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

The effect of selective laser melting process parameters and remelting scanning strategy on relative density and surface hardness of stainless steel 316L

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Experimental study on parameters optimization of selective laser melting 316L stainless steel based on response surface methodology

Effect of layer-by-layer laser remelting process on the microstructure and performance of selective laser melting 316L stainless steel

Microstructure and dynamic-mechanical property of a selective laser melting AISI 316 L stainless steel

Selective laser melting (SLM) of AISI 316L—impact of laser power, layer thickness, and hatch spacing on roughness, density, and microhardness at constant input energy density

Optimization of Structural and Processing Parameters for Selective Laser Melting of Porous 316L Bone Scaffolds

Effect of Molten Pool Overlap on Mechanical Properties and Microstructure in Selective Laser Melting AISI 316L SS

Selective Laser Melting and Mechanical Properties of Stainless Steels

Tensile Properties of Selective Laser Melted 316L Stainless Steel

Fatigue behavior of selective laser melted 316L stainless steel: experiments and modeling

Effects of laser scanning speed on the microstructure and mechanical properties of 2205 duplex stainless steel fabricated by selective laser melting

Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting

Mechanical behavior of selective laser melted 316L stainless steel

Effects of process parameters on the microstructure and mechanical properties of 24CrNiMo steel fabricated by selective laser melting