Abstract:Microstructural modification for the molten pool can improve mechanical properties of the selective laser melting 316 L stainless steel (SLM 316 L SS) at high-velocity deformation and can promote application of the SLM 316 L SS in the field of high-velocity deformation. Mechanical properties of the SLM 316 L SS with different volumetric energy densities (VED) were obtained at high-velocity deformation by using a split Hopkinson pressure bar (SHPB). With strain rate increased, compressive strength of the SLM 316 L SS peaked at the strain rates of 1200 s−1 - 1450 s−1. Analyzed molten pool and mechanical properties of SLM 316 L SS at the strain rate of 1200 s−1 - 1450 s−1, the SLM 316 L SS with volumetric energy density of 145.83 J/mm3 had a combination of minimum overlap ratio of molten pool and maximum single pass molten pool width, which brought maximum pool size and exhibited excellent impact energy and compressive strengths, reaching 1185 MPa and 125.4 MJ/m3, respectively. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize molten pools of the SLM 316 L SS. Microcracks appear along molten pool boundaries of the failed specimens was found and poor deformation coordination ability due to the misorientation of grains on both sides of molten pool boundaries makes the molten pool boundary as the weak region. Overlap ratio of the molten pool and theoretical width of the single pass molten pool are considered to be main factors in determining the molten pool size, which in turn determines mechanical properties of the SLM 316 L SS at high-velocity deformation. Further, in the process of dynamic compression deformation, microcracks were formed at the molten pool boundary, which lead to failure of the SLM 316 L SS.

Microstructure and dynamic-mechanical property of a selective laser melting AISI 316 L stainless steel

A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Tensile Properties of Selective Laser Melted 316L Stainless Steel

Effect of Molten Pool Overlap on Mechanical Properties and Microstructure in Selective Laser Melting AISI 316L SS

Strengthening Mechanisms in Selective Laser Melted 316L Stainless Steel

Molten pool effect on mechanical properties in a selective laser melting 316 L stainless steel at high-velocity deformation

Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Structural and micromechanical properties of 316L stainless steel produced by selective laser melting

Mechanical behavior of selective laser melted 316L stainless steel

Effect of annealing and strain rate on the microstructure and mechanical properties of austenitic stainless steel 316L manufactured by selective laser melting

Mechanical properties and microstructure evolution of additive manufactured 316L stainless steel under dynamic loading

Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Effect of laser scanning angle on shear slip behavior along melt track of selective laser melted 316L stainless steel during tensile failure

Microstructure and Fatigue Damage of 316L Stainless Steel Manufactured by Selective Laser Melting (SLM)

Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting

Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

Effects of laser scanning speed on the microstructure and mechanical properties of 2205 duplex stainless steel fabricated by selective laser melting

Investigation of Selective Laser Melting of 2205 steel precipitates and heat treatment improvement